injector help

[Joey351sc]

I am learning to tune. I was just wondering how you get the lb/hr numbers for say ID1000. I read you have to multiply by 3600? Im stuck on understanding this formula. I have seen were FIC injectors gives you the lb/hr but Injector Dynamics gives you a different number. Thanks for any help guys.

[txtailtorcher]

just get the data directly from ID's website. works perfect every time

[J1G5AW]

there are only a few things you need to multiply in the id1000 data as the majority is simply plug and play (or copy and paste). I literally just did this last night for id1000's.

Under scalars on the id1000 spreadsheet, everything that is lbm/sec needs to be converted to lbm/hr. easiest way is to simply multiply them by 3600. everything else just copy and paste.

[Joey351sc]

ok Thanks Guys

[LastPlace]

there are only a few things you need to multiply in the id1000 data as the majority is simply plug and play (or copy and paste). I literally just did this last night for id1000's.

Under scalars on the id1000 spreadsheet, everything that is lbm/sec needs to be converted to lbm/hr. easiest way is to simply multiply them by 3600. everything else just copy and paste.

The current data from id's website uses the correct scalars

[kevinhen]

You can change the scalars in the tune. Just click on the scale.

[J1G5AW]

The current data from id's website uses the correct scalars

They are correct, I was just answering the the OP’s question as to the way he asked it.

[Joey351sc]

They are correct, I was just answering the the OP?s question as to the way he asked it.

Hey man got a question about the info i got from PMAS for my air flow. the number of cells are not the same. i can show you pics if i nee to. thanks

[Joey351sc]

my HP tuner only has 40 Cells but the info from PMAS on has 38. here is the pics. What do i do about that? Thanks

IMG_E0347.jpgIMG_E0349.jpgIMG_E0345.jpgIMG_E0347.jpg

[BoostedYote]

Make the extra cells the same as the last data point

[decipha]

horrible advice

cross calculate the maf and approximate the unknowns then dial it in

if you can't calculate between lbs/min and lbs/hr you prob should leave the tuning to the pro's

[veeefour]

horrible advice

cross calculate the maf and approximate the unknowns then dial it in

if you can't calculate between lbs/min and lbs/hr you prob should leave the tuning to the pro's

It wasn't the best but a correct advice - you can do that and you only decrease your resolution without any significant side effects.

[J1G5AW]

Hey man got a question about the info i got from PMAS for my air flow. the number of cells are not the same. i can show you pics if i nee to. thanks

Screen shots a bit fuzzy and my tired eyes aren't helping, but I get what you're asking. And I agree with decipha on the cross calculating and approximating, it'll get you close and make adjustments from there.

[blackbolt22]

my HP tuner only has 40 Cells but the info from PMAS on has 38. here is the pics. What do i do about that? Thanks

IMG_E0347.jpgIMG_E0349.jpgIMG_E0345.jpgIMG_E0347.jpg

The spreadsheet has 39 values and you only need 40.

Add to the top: 83.3 = 180.28

Then go datalog and fine tune from there.

[Joey351sc]

Thanks for your help. I really appreciate it .

[blackbolt22]

Thanks for your help. I really appreciate it .

NP bud