Results 1 to 4 of 4

Thread: Engine Diagnostics options change

  1. #1
    Tuner in Training
    Join Date
    Jun 2018
    Posts
    14

    Engine Diagnostics options change

    When fiddling with DTCs, the MIL column used to have a variety of options (after second error, no error reported, etc.). I looked at it today and the MIL column contains only a checkbox. This is viewing an NGC3 cal.

    mil.JPG

    I haven't updated my software in several months (VCM Editor 4.5.587 Beta). How could this change have occurred in the intervening period? Am I missing something?

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    Update to the lastest beta and see what changes.

    Otherwise maybe it's a resolution issue or something.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Senior Tuner mbray01's Avatar
    Join Date
    Dec 2013
    Location
    Slidell, La.
    Posts
    1,015
    The same calibration it changed, or is it different vehicles, dodges are like your screen shot, gm's have the drop menu
    Michael Bray
    Rusty Knuckle Garage
    Slidell, Louisiana
    20yr Master Tech.
    Advanced Level Specialist
    Custom Car Fabrication, Customization, High Performance.
    GM World Class Technician
    Shop Owner

  4. #4
    Tuner in Training
    Join Date
    Jun 2018
    Posts
    14
    Quote Originally Posted by mbray01 View Post
    dodges are like your screen shot, gm's have the drop menu
    That must have been it. In my mind I was thinking of the last time I fiddled with engine diagnostics which was on a gen3 cal. Thanks!