Activity Stream

Looks like the attachment is still active.

On the pre Can cars (2000 Trans-am), would the AEM pass through still work with the MPVI3? or should I just get the NTK or AEM 0300 and wire through...

Email sent,thank you

Hey, i'm the king when it comes to burble and burning cats. Send your file, I will show you my art.

Ahh, okay. That makes sense. Really unsure of what to do to get this resolved. Probably only the state knows the answer to that question- And...

Can you send me that same file??

i got it ,

295/65/15 should measure 29.5-30". ECM 9000 should be 106651.8 ECM 5002 should be 2666.294 Was the converter cut for the super charger or...

Factory read program indicates a 31.25? tire 2494mm, ratio 3.42 vss dist ecm 9056=645.40mi Vss dist trans tcm 5006 = 401.03mi New settings...

My 09 Challenger is the same way. You can tweak the injector data like you are doing, turn off the VVT, or use the NN trainer. I ended up using the...

Do you think maybe it needs both pre cat O2s to go into closed loop?

Now that we have a ton more parameters in our transmission tuning. I wanted to revive this thread. Wondering if anyone has found some good settings...

i just took the high octane table and added 2 degrees did a 15 minute log and then subtracted any knock that shows up from that high table. then i...

Its pretty straight forward. Wire it up as their instructions https://viatrack.ca/KnockMS/KnockMS.PDF and add a wire to "Tim" or "CLT". Mine was a...

after you make a change to fueling are you resetting your trims in the scanner? are you allowing for the rich after reflash condition? i tuned my maf...

Your cam choice killed the low end torque. Best thing you can do is put the SC back on it.

Yes it has 3.90 gears with a Yukon locker. How so exactly though? I used the hp calculator and it gave a 31.5 diameter and I adjusted with that. Also...

I've mentioned it here before, I have a 215 RXP 2007 and found out that the ECU isn't compatible with HP Tuners. I've just been sitting on it and...

In the context of vehicle emissions and diagnostics, CVN stands for Calibration Verification Number. It's a unique code generated by a vehicle's...

According to Eric O your 2011 Silverado's frame should look like swiss cheese by now anyway driving it in the PRNY.

I can help with a remote tune, [email protected] we specialize Dodge