My recomendation would be to make a few log all the necessay channels to calibrate your MAF with your o2 sensors. To me that is the easiest to adjust...
Hey guys. I have the mpvi3 and have played around on it a little bit but I?m somewhat lost as to where I should start? any tips on what I should log...
Id fix my IAT issue and do a little "self tuning" to clean up the fueling before i took it anywhere that far. COULD it make it that far? Probably so,...
I over revved a stage 4 high ram build. Spun the bearing on purpose. 6500 rpm max on the log. Also had too much timing and too lean at 21* and .82ish...
your input has been extremely valuable. I thank you very much. As to why i dont just tune it myself... time. I work for myself with no employees or a...
Ive been playing with my truck started running e85 tonight with a flex sensor this is what I have....Do I need to just use spark retard to fine tune...
Wanna be safe? check it for knock. Doesnt take long to add a channel and roll around the block. after you add cylinder airmass to channels and start...
Hello all..... I have a 2017 Camaro SS with the A8 if i post my datalog could someone kindly look over it and tell me if it looks decent or not? I'm...