Activity Stream

he shut it off/disabled it, from what he said.

Im still not seeing the MAF DTC on the log, also do you have a wideband installed?

stock lm7 tb. biggest issue is the cold start idle etc. it runs fine after it gets to 110 degree.

Hmm so it must have actually been running on the improperly disabled MAF sensor. What throttle body are you using?

Loaded, added to scanner but won?t run

I did it for you in that file posted above, I also fixed the MAF DTCs to properly fail the MAF sensor, there was no code on the last log indicating a...

How do I do that? The re-enable etc

Can someone take a look at my scan file. This particular one is a quick scan in 6th with tcc locked. My tcc line pressure dips to zero and massive...

Might help to re-enable closed loop and STFT in open loop Add Bank 1 and 2 short and long term fuel trims in VCM Scanner

This has to be a scenario of you get what you pay for, right? A decent gauge is more than this entire kit. Two of those fittings from Earl's are...

Hey I'm doing about the same kind of work to my 18 silverado. Texas speed stage 3 performance package, afm/dod delete, circle d torque converter, I'm...

Here's the log for the last run. still doing the same thing. Am I doing something wrong? Anything I need to do before starting?

racepak motec etc

I will.

Make sure to load the new one with the secondary ve matching the primary.

I?ll load as soon as I get home and log. Temp should be well below 100

thanks for catching that

Still some stuff to identify but contains a sliver of the TCC lockup logic void FUN_002d267c(void) { byte bVar1; // Temporary variable to hold...

I think i was misunderstood, i was trying to say how important it was that it is set up correctly according to if fuel pressure is fixed vs vacuum...

Is this something that can still be done on new units? I just bought the kit that goes through the OBD 2 port as a passthrough

Copied the primary VE into the secondary.

Pm sent You should ask in the dodge section Most these guys here are Chevy

Has a new valve body and lead frame in it

Thanks Pitbull I'll try your changes. It will take me some time so I will get back to you in a while to let you know how I fared.

I started with the original vette OS with the 2bar OS applied. Reverse lockout and VSS work. It doesn't read the clutch now (I think it's looking...

loaded the file and waiting to drop ECT. its at 113 right now. I think some of the issue is with the "ghost cam" as he called it. tbh, i dont really...