Activity Stream

this is exactly what I did with my 08. it comes with that box to control the normal brushed fan with the pwm. Just remove box, add c7 fan. pos, neg...

Ah gotcha!

not being a smartass if it came off that way just genuinely curious bits a 5.3 swapped camaro if that makes any difference that table i see ls1 ls2...

I was questioning it because it was pulling timing at cold water temps, NOT IAT's. I know GM stock tunes will add tons of timing in high load at...

LilSick thank you for your response. So are the Flow Rate and Injector Dead Time are also referencing Calibration Offset ? Is it...

using a copy of one of sloppys tunes for 80lb dekas would be there different versions of 80lb dekas?

That?s what I like to hear, I have 23 Silverado and I?d imagine it probably has the same type of material as your?s.

It makes complete sense, colder air is denser, bigger bangs, too much fuel on top of cold making it run richer too.

Ha, that might have been me. It was a magnuson can tune if I remember right, not a paid tuner.

leans the mixture as the motor comes up to thermostat opening temp (and beyond) is the offset value for the X axis in the factory has that...

If I recall correctly, performance pack does usually have the oil pressure gauge instead of the switch, maybe they just copied everything from a...

found it

i use different channel lists and layouts depending on what area of the tune i am working on would you like to learn how to better use hpt's vcm...

Snug as a bug in a rug. Keep the NTP tap shallow so you get a good bite. No leaks from mine but if it does ever leak, I plan to get a bulkhead...

I can’t upload a photo from my phone for some reason, but there are no spacers that I can see and it’s the ls1 style plug. They look like the “long”...

Wayyyyyyy off on the shift schedule. Too aggressive. Modified it and fixed a weird dead spot in the 3-2 downshift. And set the pedal back to normal.

Thank you for the valuable information, it helps me understand how and what to change, as well as what to leave alone. Something to add, the guy...

here were 3 05 Yukon files in the repository when I looked.

I?ve seen videos and the people?s fittings are always loose as fuck, (I?m a plumber by profession) and that loose fitting shit doesn?t sit well with...

Oh, I see. This is definitely all a learning curve for me. Thanks for the explanation...and patience2. I promise, I'll get it. From what I...

Briley - make sure you have at least an MPVI2 module (MPVI2, MPVI2+, or MPVI3 is required) and then use BETA software to read the module. See if that...

hey we just got ours back from being unlocked and have done all update available and it still wont read by chance do you know what the latest ...

you really should not be flashing other peoples files to your vehicle.

i can help you shoot me a email if ya want : )