Activity Stream

yea it was going on the other, but it was only every once in a while, and on startup. I just didn't want you to bother with it because it was...

This is mine he took his to a tuner after i realized i would have to pay to unlock it.lol

wants to die every time i start it but it is idling better. maybe a little to much taken out

It is the 408 isn't it? I was wondering how you got that VE and tight fuel trims so quickly. Then I saw cylinder volume and was like he couldn't...

Which vehicle is this? The 408 or your friend's?

Try this

here ya go

TPS is showing 0.4% not 0.0%. Let's see the tune.

still same issue

How about the FPR? Before or after the rails?

Yeah you can make it what you want, but put the formula that's the formula found in the manual. Page 10 of the AEM 30-0300 manual gives the...

Yeah it's pretty cool isn't it?

Do a tps relearn. Set Engine>Advance>Base>TPS Hyst. to 0.39 and >Max Speed to 200.

color scheem of the motor says it meant to be

My AEM went bad in about a year. I don't like them, but it's cheaper to keep putting sensors in than to buy a new unit from someone else. Bosch O2...

Looking forward to it, too.

i remember when the lightning came out with a aluminum driveshaft, old school never understood that at the time.

Are you playing a joke? It has the 2bar SDOS applied. Both tables are used. Spark in the log matches the High Octane table...

we ended up using my stock ac delco?s that i had and the issue actually ended up getting worse. we checked all of the wires to ensure that they were...

We did a pull in 2nd gear to run a different test early on and I just noticed the timing appears to be locked in on the High Octane table. Are we...

I hope I live long enough to actually finish getting this thing back together, running and tuned! Icing in the cake would be a successful run from PA...

I’m also relatively interested in personal experiences with such, not just data

You can try this. You may need to compare/change the DTC. If you flash after comparing the two, you have to select flash write entire.

Dude your amazing but I really wanted to carry out the work haha thanks again for saving me the trouble!!!

If any part of your first sentence was true you would already have your answers.