Activity Stream

I will double check it tonight when I get the stock TB back on. I smell fuel when its refusing to start, so I know it's getting something. The best...

If vats is truly turned off look into the cam sensor wiring. GEN 4 V8's will act like a vats issue if there is a cam sensor wiring issue. It...

My observation.... The channel list shows actual data value updates and displays the last received value. The chart is always interpolating...

Ok I admit I did .it's that pid name. thank you and apologize. And there is. No VE tables this global A truck, it has neural network and from what i...

Plan of attack is always the same-- gather as much info as possible and try to fix it myself, but if I cannot, then create a ticket or whatever. In...

checks out when the channel list and the chart are not exactly the same which is correct? thx Keith

Still experiencing frustrations with trying to leave 5th & 6th tcc lock in place. Problems are occurring with steady/light throttle at cruising...

Most PCM's support multiple methods of scanning at the same time. Internally, we talk about these as buckets. Each bucket has its own reporting rate...

That sounds like a more likely case. Check diagnostics too... P0480 isn't enabled.

Could be it has some qualifier somewhere preventing it to run. When the 08 TBSS's came out we couldn't get them to work electric fans. After a few...

Check the fuel pressure when it will not start. I mentioned this before. Who did it?

If you tune your VE table pretty good, you really don't have to play with DD tables.

Not trying to highjack this thread but could I get some help from you on my tune? ...

Did you even read my last post? You can lead a horse to water but you can't make it read and learn. The PID isn't called Drive Mode.....I literally...

Now that is a cool trick and thank you for sharing. Being able to diagnose the issue is out of my scope of "I want to figure this out" for the time...

It in fact does not work haha. After turning the knock back on its terrible. Truck left me stranded again this morning; it refused to start this...

The main issue is cold start. And getting it to run until after 110degrees

Gothenburg Sweden :hi:

But... wouldn't remapping the fan control to a completely different pin than is used by anything else, only in that one OS/segment in one platform,...

Ah fantastic. This is exactly the explanation I was hoping for, it makes perfect sense. Thanks so much for your swift reply!!

The answer to this one is a big fat "it depends". Keep in mind, I don't know specifically how the calculator works on the backend, I didn't design...

Just responding to your edits. That formula is used at all times. Visually it seems to reduce the affect of the quadratic on the curve (it...

I think the devil is in the details, without a doubt. I think we're losing the important component of my point to semantics. A is multiplied...

I have a 2004 Cobra. Supported vehicle list says Mpvi2 only works for this so that is what I have been using. Do I need to log with Mpvi3 and tune...

Are you using the standalone logging? I had graphs that looked like, until I plugged in a computer.

Read this https://forum.hptuners.com/showthread.php?112071-Tuning-03-04-Cobra