Activity Stream

my tune and scan

Thank you for the information. I appreciate your time!

All of it. 89 lb/min @ 102 period just seems insanely high to me especially for an N/A car, but if it works I guess it works.

What looks weird to you? Those should be the numbers from PMAS, Their chart shown below.

MAF values all seem weird to me, but nothing really stands out in this tune.

Drag only cars get away with those injectors because they don't care about anything but WOT, and they constantly change parts. They are not even...

Your RaceRender application seems not to be compatible with newer Windows or newer CPUs. I suggest you run the software in compatibility mode...

Agree with the min. airflow. Also, if you're trying to set it up in SD only, you'll need to revisit that. Add VE and Dynamic Airflow to your channels...

I’ll have a gauge in it tomorrow or the next day. Waiting on a fuel rail fitting to show up. I’ll admit I’m assuming the brand new regulator is...

FYI, Had my injectors flow tested/ cleaned. Honestly never would have guessed over first winter of having the motor sit. E85 will stick 210's like no...

Did you clear the trims? How are you checking the fuel pressure? What gauge do you have, or are you just assuming it can't be anything other than...

Uploaded the injector data. Seemed to go smooth but didn’t fix the problem. Still running rich with LTFT showing -10%. I feel like I’ve checked...

I used it before and had this problem often!

il check that, thanks. My lean tip in does go away for the most part after it is warmed up. probably above 180F ECT. I found this deep in a...

Alvin, I have both, I'll try that.

Fast4.7, thank you.

Cobra30689. Thank you. I'll go back and check the year that this is. I've used them to control fans via temperature on the early ones but not by...

Yes. High side reached 275.

Ha it was a trick question

Any hints as to how to hold scrawny little 7 degree valve locks in a lathe chuck?

If you still want to go the data file route, you could put in your numbers into this website: https://www.hobo-bob.com/composer/laps-step You'll...

@KillboyPowerhead, Thank you for your feedback. This was the first time I used the log function and pretty much used the default channels as I...

Just noticed, right before the dip in the ignition timing, your fuel injector pulse width drops to zero. This only occurs this one time after the...

Thank you! trying to find a stock tune to copy. appreciate the help