Activity Stream

99 Ford F150 non lightning is not currently supported.

So who is the tuner here? If OP is tuning this, he should be able to unlock the file before sending it? If not, he's out of luck anyway and needs to...

nope

For anyone who runs into this in the future. Speartech sent the modules/harness with the clutch switch DTC's turned off. That doesn't work with...

post the tune file

Any insight on which parameters need changed (and what method/tuner you used)?

Hi iam also having an issue tuning hellcat with 1000cc injector iam relatively new for hellcat tunings. So what tables need to be changed for the...

This work?

Read the tune off and save it as a new name and post it here.

Ill attempt to investigate.Any tips on altering the "tooner lock"?

What?s the difference ? You see, nobody knows the answer lol

When dealing with these issue where the car is falling flat on it's face you need to log the channel "throttle torque source". This is a good...

I just need a base file. I had one show up with the whipple and has some big cam, I cant keep the throttle open.

Hold on, something sounds fishy. You need to find out what injectors you have in it and get the correct injector data first. After that put a fuel...

I haven?t touched the tune, I had Nate aka Dr tuneemall mane the original tube then he backed out, then I had pcm of nc tune it but they couldn?t...

Thank you for the tune info, see some things to adjust. Are you using knock sensors with this tune? I can't get the channel to show up in VCM...

hi iam a tuner but mostly NA dodges. Iam not expert but learning. Iam trying to tune a hellcat with 1000cc new fic injectors. Iam struggling with the...

Not sure that "stock" injectors mean much in this case. Stock to what? You should always give part number for injectors to remove doubt about what...

So have you changed your injector data to work with boost referenced regulator, assuming that abc is correct that it isn't set up for referenced...

that all depends on how far you plan to mod it.

Is it happening for all gears? Just looking at the 2-3 shift times ( 15712) it does not follow the gist of the other shifts.

Fuel pressure is good. And it?s got a boost referenced regulator.

you want to select "stock" calibration.

There is no need to lock every mapped point. For example, on my truck, MP0 is only used at idle and decel. Off idle is MP1 etc. Setting up the...

Good morning! After working with Gary at PSI yesterday, we discovered the pedal I received in my order was bad. We had a pedal on the shelf, plugged...