I should probably mention that if I take it up to 70c and try repeatedly I also occasionally get a vehicle init failed message in VCM, though it may...
PE Min MAP should be 70-80 kPa, you don't need PE when there's no significant load and if MAP is less than that it isn't making enough power to need...
Thanks again! Your excel has different data than the previous one I used. I will check the injector part number and try with this new data.
This has...
When the MAF is disabled they run on the Low Octane timing table unless on a custom operating system but I feel like Alvin should know that already. ...
So I have gotten away with on stock stuff just scaling tb for bigger and moving a few limits out of the way. Then I was able to get mild stuff to act...
I appreciate the help I'm sorry I don't really have a log. I got around to testing the connector today. with ignition on I tested terminal A-C (grey...