Activity Stream

Yep. Whole different ballgame there. And, like Alvin said 01-02 F body is going to be your best DBC operating system.

Right, thanks for the response ... I have a donor PCM to send in but HPT needs a read of the OEM PCM to be included with it. It's my understanding I...

garbage in = garbage out.. be sure it's right.

FBC.. fly by cable. same as DBC If its a 2000 PCM it should have IAC drivers in it. I'd wire it like a 2002 camaro/firebird. By far the best...

got the offset pretty close i just think the way it logs its not going to be immediate to the guage no matter what. i removed a lot of pids didnt do...

ur killing me with the 15 seconds stretches of 97KPA at 15.2:1 air fuel at 2400rpm 10* timing No EGT gauge. When EGT rises enough the piston rings...

Forgive my ignorance, what is a FBC application? This is a 2000 PCM and lt1swap does call out the 09354896 PCM as having the IAC drivers but I...

Forgot i had a friend clean the injectors 2 years ago. This was them and report of data.

They are not the same... the one with the VIN not scrambled is 12632176, which is correct per that 2009 VIN. The other one (original) with the...

I've not had a problem with the FAST 85's but they are not my first choice either. I wouldn't buy them for a build. Having said that I've used...

I can unlock the ECM if you need. I *think* we charge $75 for it but I know its on the website if you want to check for sure. Other than...

I'm not sure what year your working on but chances are there is a FBC application with the ECM you are using.. Some/most of the 03-04 computers do...

Thanks for all the input! I can only go by what I was told when the twin turbos were fabricated years ago. Most likely, I was given incorrect...

Oh I should have mentioned that! Sorry. I'm putting the C5 stuff into an 88 rx7.

You need to send your PCM in to HPtuners to have it unlocked. Without doing that there's nothing you can do. ...

Im only using map pointy zero, is there a way to turn off all the other mapped points? I thought that when the VCT and imrcs were disable the ecu...

As long as it's in a swap car there's no problem. Trying to do it in a C5 you're asking for lots of headaches. There is nothing straight forward...

A P01 pcm can run an L31, google black box to ls1 pcm swap

Swap an LS1 24x crank into a Vortec 350? No, thats not how that works

I suppose that's part of my question, what OS should I look into flashing? The lt1swap.com post made it seem straightforward but it looks like thats...

Hello, Please, send me an email at dodgeboy_8hp@outlook.com Thanks. DodgeBoy. YouTube: https://www.youtube.com/@dodgeboy2785

I'm curious if the HPT folks have any update here. It's been more than seven years and two major versions. :) If this is still difficult to...

I've had those problems too with them being too smooth - other idle tables can help to get that back and I'm not talking about just the adaptives...

When I search for the base OS shown in the run1 logfile (12639469, before the 2-bar was applied), it comes up as a 2011 CTS-V.

If this switch is set to false (as all calibrations a saw) Throttle maps selected using 4WDLow and ECO mode inputs: A - Normal B - 4WD Low C - ECO...