Activity Stream

I don’t have a WB yet, but when I do is it possible without a dyno and with limited knowledge to do SD?

I relocated my MAF to the bottom junk drawer in my toolbox. Works much better now.

my point was that the guy is dead in it in second gear and the input shaft rpm sensor is reading 5735 there is no way the trans shifted at a...

I will get another log tomorrow. I upped the oncoming pressure some for the 1-2 and adjusted the inertia just slightly. And made sure the adapts...

AbsolutelySick what a great user name! enjoy your tire roasting monster bet its fun : )

I haven’t been able to get my hands on a MAF besides just buying one yet. But I’ve been looking around and started coming up with some questions. ...

Works great. Thanks.

Never said transmission is driving the engine I wrote: input shaft is 5722rpms / engine is 5650 rpms. What driver see in the dash is engine rpm...

have you messed with the cams?

After many more attempts the car isn't a lot better than it was. In reference to my last reply with the added advance, I think that was mostly false...

https://asmedigitalcollection.asme.org/IMECE/proceedings-abstract/IMECE2015/57434/V06AT07A060/257976

VMWare Fusion is free now.

Was on the lookout for a fun online casino, and that’s when I came across Ricky Casino. The site is well-designed, with a good selection of games...

Do we need to just guess at your mods and stuff or just tell you random things to try without any information?? The VE table is a complete train...

Working setup: VMWare Fusion VM running Windows 10 Pro on an Intel Based Mac Pro + using an official Apple USB-c to USB-a adapter. This way the...

This is the only one right choice when using GMLAN TCM. GMPP ECM has most of the GMLAN messages disabled. It does not even listen to TCM torque...

" added to the 1.2g row" airmass

Of course. There are 16 idle speed sources in Gen4. Gen3 has a little less, but at least a dozen.

I realize this thread is old, but I encountered a similar experience. Using Windows 11 through parallel desktop on a MAC OS, I ran into a detection...

I realize this thread is old, but I encountered a similar experience. Using Windows 11 through parallel desktop on a MAC OS, I ran into a detection...

I realize this thread is old, but I encountered a similar experience. Using Windows 11 through parallel desktop on a MAC OS, I ran into a detection...

My engine setup is pretty common. A 5.7 rocking a basic 6.4 cam kit and bolt-ons was in 4 or 5 common tuning threads. It's how i got started! ...

So you believe at wot the trans input shaft was driving the engine while up shifting from 2nd to 3rd gear? Interesting concept Completely...

there are millions of 2015+ 4x4 chargers with stock 5.7 liter hemi and 3600 stall and a nag 1 : )

Correct on input shaft: 5722 rpms Wrong: Driver see engine rpm, not input shaft. Engine: 5650 rpms

steve, stop fkn around with downshift scenario i would fix the engine tune before working on the trans whatsoever if i were tuning it THEN,...