Activity Stream

They are chinese made as well. Stick with stock or nick williams.

Thats a good idea. I dont believe I have anything located that could do this. However, We could potentially make a custom OS Patch to do this. ...

Yes, you can set up the E92 to run SD instead of a MAF blend.

38% Fuel lobe needing .060" cap on a LT4 pump is pretty unusual. I'd be willing to bet the lt4 hpfp doesnt need the lash cap or if any is needed it...

You should also disable DFCO as well as it can skew data, Engine>Fuel>Cutoff, DFCO>Enable ECT set to 284, I don't think this will have much of an...

I just wanted to post a follow-up on the TAC module issues I was having last January. I didn't take any pictures of what I'm about to disclose here,...

Are you saying that dfco could affect the timing?

I will try this. Thank you for you feedback.

put the stock t body back on

Agreed Nick Williams stuff is nice. A little pricey but nice. Have you heard any reviews on the Summit or Jegs branded 102mm throttle bodys? This...

DFCO was still active in that file that could be why it didnt work

Anyone??

I sent a person from my shops to one of those tuning schools. Thought it would be nice if someone was trained by a different person.. That way I'm...

google blue cat trans tuning tool do that, upload to your tune and see if your issues are fixed. let us know how it turns out

Well first off a grammatically correct paragraph with full sentences so we can understand the question. And then when follow up questions are asked,...

If you didn't check pre-load with the lash cap, you may have bottomed out the HPFP and trashed it.

Turn your O2s back on. Use them for everything under 4,000 rpms. use wide band for WOT runs. Nothing really works well at idle. Your idle, for...

Thank you, but I'm not sure how accurate they are ;) If anybody has any input on my issue of the lean spots when having both SD+MAF active.

Yep makes sense, I am a software engineer so i can relate lol.... i enjoy learning and geeking out on air fuel and fire. I think I spent a week...

These are very nice quality. https://treperformance.com/i-23907873-nick-williams-drive-by-cable-103mm-throttle-body-dbc-black.html

I agree 100%.

Id put a pressure gauge on it to see whats going on now that it has stock pressure settings controlling it.

RPM, spark, spark correction, inj duty cycle, inj pulswidth, fuel mass cylinder 1, wideband reading and narrowband readings and that 90% of the...

Remember there is a big difference between knowing how to operate a software suite vs knowing how to tune a car. Some of the guys on the pcmhacking...

The part I didnt mention is the guy who was working on my tune is an HP Tuner instructor. To his credit the VE table is my hack job after the new...

Thanks for the clarification. That makes perfect sense as I have seen this some.

Gen 3 ECM's will get "laggy" if recording to many channels.