Activity Stream

steve, stop fkn around with downshift scenario i would fix the engine tune before working on the trans whatsoever if i were tuning it THEN,...

Heard some great things about live casinos and wanted to try one myself. That’s how I found KingBilly. The website is easy to navigate, and the...

Here is the tuned file it's running now. Hopefully this will help those of you with a similar setup.

Definitely the tune could use some work on shift pressure and torque converter set up. Depending on vehicle use, shift schedule could be changed...

I assume there isn't a work around for the 1.2? The boost PE makes up for it? I assume you go pass it with boost.

Going to update for everybody. I was able to correlate 95% of the issue with a failing torque converter clutch and terrible stock lockup settings in...

thank you for the info.

A permanent code is not an active code. If it were a pending or a current code, then it would be active and could pose a problem. Essentially,...

Updated Log and Tune Attached...

So I can now get it to rev to target shift point of 6100 rpm, I had a throttle torque source issue prior causing an RPM Limit. The shifts feel...

Some of the 1-2 shifts are better some are quite worse, mostly the ones under lighter load. But it will take a while to adapt and fine tune the...

You took the words right out of my mouth, you spend this kind of money on a restomod and it's super disappointing to know it can drive way better...

You can also adjust your ground offset with the formula. I find it much easier to adjust ground offset when in lambda. It is a important step to...

I can't tell you that. You need to run the proper diagnostics for your vehicle. Buy a subscription to alldatadiy.com. I'd re-enable the code and...

In your very first screen shot the small downward spikes look just like spark smoothing. I know it says "TM" spark but I'd bet those go away by...

Oh you should've said something. I told you to run it a while and let me know if anything comes up. Make a log and include LTIT (Gear, PN) and...

Log files are saved automatically when you stop them. Do a search on your drive for .hpl files and you can sort by date for newest. Or do a save as...

Unfortunately they have locked the end users from adjust any critical parts of the tune unless you are a shop. Really a bummer because I have a paper...

Yeah there is no way to read it just pulls a stock file down for HP tuners.

its stock as far as internal engine afm programed out , stock exhaust with cats just added a flowmaster muffler i know this is gonna sound stupid...

Getting it closer to dialed in I think. The idle tuning from stone cold is tough when you only get 1 or 2 chances in a day and are making small...

I was under the impression that those tables were for autos. I'll have a crack at that and see if it makes any difference. As for the throttle...

Care to elaborate any? I'm not a professional tuner or anything like that. Just trying to better understand the system and how it works. Thx

Is yours the 6 or 10 speed? Curious because I have questions if its a 10 speed. ZZP is on 28th street right?? I don't think its to far from where I...

so do you think this is maybe an issue with the switch? should I replace it even though I had no issue with the factory PCM? should I have the...

If the CEL is out and all you have is a permanent code, they're correct in that it will take a few days for the permanent code to disappear. BUT it...

There is a thread about the MPVI2 and HPT said not to leave them plugged in. I was dealing with a problem where I'd come out to a dead battery. I...

Which of the 3 detected controllers matches the number printed on the engine PCM? Select "do not read" for the other two, and only make selections to...