Activity Stream

Idle tuning is last

Not much. Gonna try and play around sunday with tuning my sxs 950 ho. Did a few changes to fans and speed limiter. Gonna add some timing and log.

I can make you one that works on stock cats, but nobody is CARB certified here

Cool thanks, managed to add it, my stock injectors at over 80 percent duty cycle before I even hit 5,000rpm, I am running on the rich side for now...

Pretty sure as whittlebeast said standalone without the PC connected using the pro link doesn't work. Been chasing this issue for a while with tech...

what's up everyone New to tunning I'm also coming over from Diablo. Looking for more adjustability. I'm not a tuner by any means but want to...

https://youtu.be/cOkktdcOCw4?si=-wimmfOU_RVNERfl

Overlap greatly exacerbates the issue especially with a converter that is too tight and fully loads the engine too early.

yes it?s the same hummer, we had Nate kuhle build our base tune then he backed out, I think Derek said he was able to fix the fuel trims but I?m not...

So, kid went to bed early and this engine was on my mind, so i did some tests. Did the shop-vac to the intake method, absolutely no air leaks...

yeah i understood your reply, thanks. all i found so far is the gen 4 way of getting the ghost tune. but mine does not have the settings to adjust...

You're welcome I should have also mentioned that if you search "Ghost Cam" there are several videos with approaches people took. I had pops &...

I know this issue was a good while back now, did you ever figure out your issue? I?m having the same exact issue with my 13 CTS V. I?m running drop...

Log file https://www.dropbox.com/scl/fi/coch6ypoen8tt0pqws1c0/3rd-test-drive-No-wideband.hpl?rlkey=801fj8efolppxia9j31frcn2z&st=ycqjvxj6&dl=0

Thanks for the heads up, Whittlebeast. I was looking for alternatives, I will check that out. Im sending the mpvi3 back, hopefully they can find...

A lot of possibility's there. Is the cam timed properly during assembly? Did you replace the lifters? Have you done a full compression test? Quick...

Man if it works you are a true lifesaver. Where in the vcm editor do you disable it ?

thanks for the reply. i was waiting for the "why do you want a ghost tune" and i get it, just cant do a real cam just yet. so thanks for not being...

Thanks to those who read. I was able to borrow (test drive :secret:) a 2016 DCT and got a clean stock read. For anyone who needs a stock file to...

Just so you don't think I'm blowing smoke up your ass on this either... When we put the new racing long block in the car and started to go north of...

The 58 tooth reluctor wheel is spinning too fast so the pcm pics it up as a misfire. I disable them in the tune. Im running 26psi on my supercharger.