The sensor pin out has nothing to do with how it reads, other than its circuit to and from the ECM, ref, signal and sigrtn. Its a hall effect sensor,...
Visually it looked much more flowing, transitioning well between cells. As for performance or fuel economy it's yet too be tested. Which will be done...
Here are couple of logs from the 2008 E38_T42 8l_2bar_os_idle_retune_4_hj1_andaddednonsense file. Coming to a stop starts to have a surge. Is there a...
I have not been able to check fuel pressure under WOT yet however with the vehicle idling the fuel pressure at the rail is around 40psi and stays at...
That's the thing. It's not necessarily a contraption, simply a wire harness that changes pin outs for the signal. Thankfully, all my wiring is good....
Hey guys I have a supercharged 4.0 I'm trying to get running , does anyone mind helping me out ? It's got 36ln injectors , sprintex supercharged and...
Root cause is definitely torque models, in particular MAP torque. This will be wrong, but it should be a step in the right direction... Get a look at...
My IAT is mounted in my piping between the intercooler and the throttle body. I don't know how much impact that has as it gets to the manifold area....