Activity Stream

I've had the same issue with mine for years. The only thing I can think of is it was damaged from the factory and with the increased power it cant...

Mainly wanting to compare yours to mine.

Did you need help with something specific?

Cat test & Post O2 test are both still on, even if it has cats those need to be off for tuning.

Did you need help with something specific?

Input all the data into the "Editor" tab. Then go to the "Scanner" tab and click the COLUMN AXIS COPY LABELS link. Go to the scanner and create a...

I'm about to give up on this lol, I can't make my questions any easier.

I havent been under the car but it does have long tubes. I still need to go through the dtc list. The main thing to start out is going to be getting...

I just realized his EGR airflow and spark adder tables are still populated. Those need to be zeroed.

You need it so the tool can calc the SOI.

Can you address the question I posed a few times about the scanner data gathering? That's literally my only question, not questioning anything else...

If you hire 1000 tuners to tune your car you will end up with 1000 unique tunes. Everyone has a different solution. Is there one single best tune?...

Here's the log and the current tune with the Wideband logging thru the EGR. The log is sitting in park and to operating temp. No drive was done. ...

Cats or no cats? It might not cause any issues but I wouldn't have PE and BE set to the same number, let it choose one or the other (it'll use the...

I see. Im 234/246 115+3 @.050 I think I need to target around 425ish but but i'll follow along with your thread and see how it goes.

He estimated the valve events on my cam but just for reference, it's 243/259 114 LSA, 111 ICL. I was never provided a cam card from RPM.

Gen 1 should be able to benefit as well! Similar tables in that regard. I keep a much harder eye on fuel pressure on gen 1 though.

That's very similar to what i have came up with. I have the TSP stage 2 and the cam events are very similar.