Activity Stream

When you input a formula into the filters section does it get rid of what that filter says or only show what that filter says? and can somebody give...

huh i didnt think that to many pids would be a issue. Heres the list I got now.

You have to have rpm, cyl air, map, and ect for most any diagnosis for any problem. After that, just add in what you need for whatever you happen to...

Widebands are much more finicky about overheating than factory narrowbands. You will notice the factory placement of narrowbands is much closer than...

thank you 04Silverado, ill give that a go! i was trying to get blucat to work but ran out of time trying to sort it out Alvin, this would be a...

They should show up now

Ill get some toned down logs. What all should I leave in?

They recommend placing the sensor around 1 m (40") from the closest exhaust valve. Where this cannot be achieved then spacing the sensor away from...

Could not find a lot of information out there about the "distance from" location. That link abc posted, Sensor Installation Guide , includes...

Too many channels open i guess and that's the one it said nope

Still not showing up it's greyed out when I open channel listing. I'll load pics later

I am experimenting cause in my desktop they show up all fine so I saved everything in my laptop on the laptop and USB drive so see if that works

so much for support huh. if your not driving a common vehicle(mustang,tahoe,suburban,etc) you get no support diy or paid . so im posting to myself to...

You are trying to log over 100 PIDs. Cut that down to about 20 and you will get more useful information. As an example, I was trying to see what...

Maybe you posted the wrong log.. maybe I'm blind. but I don't see it.

Seems like you are making progress.

It doesn't look tuning related to me. Fuel pressure or some other wiring issue. The o2's are dead lean while this is happening even with a huge...

What is the "small build" lots of people choosing the wrong truck cam lately.

You can try this file. I used the bluecat tool for shift points. I set the shift times to 0 and used the torque adder tables to set the desired shift...

Also GM stock OS numbers are almost always 8 digit numbers. When you see a 7 digit OS number there is a good chance it is a Custom OS.

These 6L80s don’t need much to get them shifting pretty good and you can use the bluecat tool to get the shift scheduling pretty dailed in. Also...

The one that shows the two OS numbers is because it has had a custom operating system applied. The first number is the original OS, and the next...

Someone has applies a HPT Custom OS to the original GM OS. 12212156 is the original GM OS and someone has applied the 1273002. So now it is the...

Try this. EBP Tables: you had way to much down low in the rpm at high load. all that will do is close vanes and create alot of EGT's basically you...

Sorry, this is the tune file I meant to show. It has 2 numbers to the left and one to the right. This is the file I was sent. The prior pics are from...

My guess would be valve float. I didnt see a larger turbo on the list. The stock turbine housing is so restrictive that the exhaust pressure is...

It doesn't say "per cylinder" which is why I asked.

took 15% out

trans -> shift scheduling -> part throttle shift -> normal