Activity Stream

I'll be honest. Might be a good idea to think about swapping the harness to a traditional GM setup. I noticed the same thing.. Like after a...

There's 2 files that it came with, one for a 2400 and 3000 stall converter. I have tried both files with and without any adjustments to them and it...

Print to PDF! thanks

Issue is at 100 mphish in 7th gear which would be the 1:1 gear on the 10L80 is the shaft would spin the same as the 6600 rpm that this would be...

Hoping it can possibly be adjusted.

Here ya go.

LOL That got me good LOL

Sounds good, if you end up getting our TOW&PRO kit send us an email at [email protected] (I answer those 99% of the time) and i'll walk you through...

There can be several advantages. If I am working on a swap that requires a P01 computer, I'd start with the 2002 model OS...typically 12212156 OS. ...

You should post the tune file. Very seldomly do I see a 6l80 setup correctly on here.

I have never heard or read anyone discuss the actual RPM. Just a generic 100 mph'ish limit.

Thanks for the input! Ive already ordered all the clutches in a kit (GM part), a 2-6 assembly and a 1-2-3-4 clutch hub assembly. Ill probably replace...

Apples and oranges as far as the kits are concerns, the Zip Kit is more like our Shift Kit? where it addresses known issues with the unit. Our...

I cant find on the list the ecu that works so i can read please help

You would need specialized aka $$$ equipment to test the solenoid. You would have to either throw a TEHCM to see if it fixes it but I say 95% of the...

actually, I do have a intermittent 5-6 flare, usually after the trans is up to temp. And like I said, its an intermittent thing. Should I take the...

Not going to be a checkball issue on the 1-2 unfortunately. Only four possibilities: 1- Not enough line (you said you checked and confirmed it was...

gotcha. im a tech for GM, so Ill be rebuilding it myself again. I have the Zip kit in it now. what are the differences in that and the TransGo kit?...

bump. Who here can shed light on this

Surprising it does not smell burnt considering just how badly the 2-6 is slipping. By the way, when you get it rebuilt I highly recommend you get the...

Hopefully mate you have had some luck lately getting it dialed in and if not and it's still giving you the shits lol, Each to their own but i'd...

Here I made you a file to try it with the MAF failed. It may run worse.. depending if it's been tuned SD VVE.

Cringer, Here are a couple of scans from lunchtime today with your tune. Seems that VVE is a little rich to me since VVE CL is pulling fuel. If...

Ok, I was just checking on failing the MAP. In my case I just lowered the enable/disable rpm but I didn't change any DTC codes to fail on 1st MIL or...

Hey Mate, Sorry For Late reply to post but here is a 2009 GTS LS3 317KW Manual File OS 12624402..I'll have to check and go through my other 3 tuning...

I was hoping a check ball or valve in the valve body.

I'm having same problem. I purchased the MPVI3 back in August, used it one time. Two months later go to use it and no power when hooked up to my car...

I was wondering about that being the case. Fluid is nice and pink and smells new. no burnt smell at all.