Theoretically, 3 Bar for the same application should have the same values, but it seems like the sensors for old applications are all over the place....
Different, I had come up with 329.45 and -6.35 for 3 Bar... Ill try that as soon as I get these miserable spark plugs done here. Thanks GT, I'll post...
Ok so just a follow up here. 07GTS had commented on a different thread that maybe EOIT was to blame. I had come to this same conclusion (or at least...
Depends on the setup and if NA or Boosted. And the below is a general statement and not to be taken as gospel once you deviate past simple bolt-ons....
Old thread but after seeing data logs on one of these in stock form, they actually do run a lot more timing but wayyyy up top like 6200+. Like 28-29...
The truck does have an intake, and no cats I did adjust my airflow vs volts by the smallest change to the whole table, it was extremely touchy. I was...
Figured it out! The nut holding the main ECU power cable to the lug on the power distribution block was slightly loose. Tightened it up and it's good...