Activity Stream

You can pretty freely switch between using 20218. There doesn't seem to be anything complex that uses that status bit... it just affects how the axis...

Fummins_Tuning can I reach out? It looks like you?ve done quite a few of these.

Adding in my experience, I purchased a 6l90 with out history for my swap. The T43 TCM also has the part number 24294925. Trans OS is 24294926. ...

And yeah I've been thinking about just picking up a beater and just learning as I go. I've heard some really good stories of people doing such and it...

That actually sounds like where I'd like to start. Obviously you went to school and such to become a maintenance tech. Would they have...

Yeah I do actually, I think I am on the right track now. I found a thread that said to max out the diagnostics for several codes (this one included)...

that is correct. the channel list you sent is the same as the channel list I am logging?

Here's a log from this morning's school drop off. You can see the spike at about 1:17

One and done, hire someone to tune it for you. A new hobby that will eat up a lot of time and energy (lots and lots of time), tune it yourself.

I've taken quite a few notes and scanned the other posts mentioned. I changed the throttle body mapping to find that sweet spot of transition to...

You tube will be your friend, google "How to ..." and loads of info. will appear. Read things like this: ...

Not sure why you assumed I?m making this up. Idk why both idle torque throttle and idle torque spark still stock. There?s only one tuner in this file...

Only one I have like that is the GMPP LT1...here it is if can help

the larger displacement should get the charger moving at a lower engine speed, which will provide the "low end grunt" im after. obviously the top end...

I would recommend opening a support ticket.

Warmer thermostat for the engine. They make thermostats to put on trans coolers. I think the one that I have is by Derale.

Datalog the number of misfires, cylinder by cylinder and total. Look at how many misfires you are getting on a drive cycle. My cammed, supercharged...

it is hard to believe that with all those mods and having multiple tuners in this file that both the idle torque throttle and the idle torque spark...

Whoa. I guess I didn't export that correctly, then. Here's the whole log. I believe I'm seeing the spike at about the 32 second mark.

easily done

The wiring for the prolink to AEM will be in the instructions, pretty sure it’s the analog signal out off the wide band ( 2 wires ) .The logging of...

Do you mean this? No "performance" exist from ACdelco ACDelco Gold 9748RR

in the 43 kpa pic the engine is idling at 800 rpm 95 kpa engine has stalled and is not running nvrm... i looked at the log and yes,...

looked at all my LT1 Files, they all using vehicle speed as x axis.

I've wondered about this setting... But, seems like if the engine hits 166degF, the trans should be able to reach the same temp.. which should...

Your build has violated PPEI requirements for transfer case control and speed sensing. Look for GMW3119. Start from scratch, use closest gear/tire...

Way lower MAF values got me stumpped, The MAF values being reported is also being intermittent reading low at times and high at other times same...