Activity Stream

Without knowing the details of the build, it may make sense that cylinder volume is changed to approximately a 408 motor. Even with aftermarket fans...

I haven’t done it yet, but I’ve thought about wiring in a card style maf sensor to replace the Lin based system and just rescale the maf to normal...

I think Dave has a MAF medic, but I believe it’s hard coded to 512 still..

He's been told. https://forum.hptuners.com/showthread.php?115682-new-to-the-tuning-world-im-needing-getting-my-tuck-to-idle-and-drive-correctly

2006 tune needs to be written entirely to the 2005 pcm. The 2006 uses a different TAC, PEDAL, and PCM Operating System.

Yikes.

Ah the 8.1l marine injectors. You should use injectors that have proper characterization data for your PCM, it may work, but it ultimately will never...

When hitting "retry" on reading from interface in the help menu, the mpvi3 goes from blinking green to blinking white in quick sequence for 1 to 2...

Sounds ominous. Please do tell!

So once you make the hardware changes, cam and supercharger wheel for instance, is there a good starting point for ve, or is oem ok? I...

You have a point. It was more about respecting their work, I am sure they have more then paid for their time invested. With that here is my tune, it...

Sounds like it fixed it? In terms of converter tuning, It's really just locking and unlocking tuning. Usually people keep it unlocked in 1st and...

Hey Quik4g63, wondering if you've made progress on this ar5 swap? I have a 10 coly factory v8 and swapped in the the ar5 also. Last year i smoked my...

1st and 2nd concerns, both are stock values.

My mpvi3 is having the exact same issue. Things I tried, 1. Cables 2. Tried Newest Beta 3. Tried different computers (3 total, 2 windows 10 and...

When you hover over an item in the editor it gives you a basic little description of what it is at the bottom...

This one has 3.42 rear gear compared to your 3.08, which explains nearly all of the differences from yours which are in the transmission shift points.

Im waiting on my support ticket to make the prolink CAN work with that right now. Kind of a hassle switching between CAN and Serial for pre-can...

So you want to run stoich A/F when in Boost Enrichment? Because that is how you have the BE table set up.

Active jetsport, Keep up the good work, brotha! Your tutorials are much appreciated!

That's good to know. I would greatly appreciate knowing more about how the PCM manages the CMP failure, like does it fire the injectors in batches of...

Hi Bk2life, I think i may have found an "Not Lose but lose Hose Clamp on my intake boot". Open Loop Speed density.

Having a look at your supplied data sheets, I'm a little puzzled with the injector constant inverse number. Stock 1gr-fe injectors.....inj...

There are two fuel system types. The accurate but clunky names for them are referenced to manifold and referenced to atmosphere. As shorthand, we...

I'll try that once I can get back to the car tomorrow. But suspected it was injectors putting too much fuel being the incorrect data.

I already told you what to try. If it runs on starting fluid or parts cleaner then your injectors are not injecting fuel.

I'm not actually sure if it's the data that is wrong, to be honest, but never hurts to have someone have a look at it and confirm. I believe it was...

the aforementioned and a good wide band (or two) set up to display lambda sent you a dm