Activity Stream

Yeah that was a stock stage 2 tune on fuel trims. Should be stage 2 injectors, I am not 100% sure on base fuel pressure I have to install a new...

I didn't try to read/write it, but the scanner did read it. Was able to pull the codes out of it.

Dang my mortgage payment is in the mid 500s.

When you have a manual trans, which row does the tune use?

Not sure I ran my 0334 analog bc I couldn't use the obd2/can

It really is a personal choice based on how happy you are with the way it runs now vs how much time it will take to redo it. I have seen tunes that...

I think almost everyone tunes part throttle in closed loop with the factory narrowbands. Those are what the car uses to set the fuel trims anyway,...

Its not just CS36 :)

I might would consider doing it for that. Can't till my truck is paid off though, I think I have a year left. Money is tight right now, homeowner...

Wow. Ive never seen anybody make the table look like that.

Have you tried to disable all three torque management in the transmission.

I build my own harness and can get the ECU for a good bit cheaper. Most the times its only 2000 for the ecu and harness supplies. Screen can be...

Try this, also make sure trans temps is in operating temperature.

Sounds like they lied.... LOL

I was just looking at the holley stuff just for kicks. I don't know how people afford that stuff. If I got a dominator, the computer is $2350,...

I have attached my file. Thanks

I believe it's gonna be HorsePowerguru427 for the win. -- Engine>torque man>General>ETC TPS Max And yes it is a P59 And Thank you I hate to...

You're going to need to post a log. There are probably some people who can glance at this and say "change this, delete that, ETC... But most will...

having the same issue, fails to read vehicle file. Any advice with this issue?

I have one on my laptop. Will grab it when I get home.

If it runs ok I wouldn't bother changing it. There are many other things I saw in the tune that I would do different be everyone has their way of...

Do you have to pull the ECM and send it to HPT like the 21+ F150?

YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYES! I saw some anouncements about this today. Time to figure this out. So I read, "This model is supported on TDN...

Are these things worth changing? To some extent of the tune that's in it works I'd rather just leave it. That said, it's become clear how much of a...

I think this is the sort of sanity check I was looking for. As many weird tune things as there are going on here, given that changes were made and...

I'm not a truck guy but the cam you listed in your other thread is advertised as "stock" for nearly every vehicle built with a Gen V LT1 or similar. ...