Activity Stream

Unless you are trying to crank the car on the moon, you are not getting a real MAP signal.

Again More improvement. Little bit of retard going on...

with the voltage reading fluctuating like it is (in stereo with the throttle issue and the misfires) i would not be surprised if it has a bad...

Here are the files

Got a part number?

ask the tuner if he saved a info.log and start a trouble ticket with support

I have successfully set the minimum value for ltit to 0 and raised braf slightly to get a little extra airflow while moving. Not sure that would work...

Yeah, I had seen the closed loop thing somewhere else in this thread, and it give me ideas, but this is an area that even with DHP software that I...

Wait so your tuner thinks tuning the gear ratio and tire size in the ECM is going to change how the transmission shifts without touching the...

Ah. Didnt catch that. Well something is pulling the airflow down during a coastdown, ill try and look at it again tomorrow.

Well that's just the thing, my buddy's 9-7x is also an 08 so same year and platform. I need to get him to come by so I can pull just his TCM file....

Throttle cracker isnt going to function without vss.

A calibration file might have the information there but that doesn't mean the computer is actually using it for that application.

You should delete half those channels while logging, then add throttle cracker and follower channels. Again cant adjust adaptive AF until fueling is...

Without really putting much thought or effort into it, all you need to do and look at your log and see what the MAF hz is showing in the cruising...

OK, so subtract 'TUTD' and replace with 'feature'. A thing that one platform/OS will do is not guaranteed to be able to be added or enabled on some...

Oh I get that, my lincoln does just that. But in this case its because its my wifes daily I built for her. I want to basically neuter it for her,...

Not referring to TuTd, although I know this one will because we have it functioning in my buddys truck. Talking about when you pull the shifter...

Ultimately, yes, I should have mentioned the end goal here. Just aiming to get fuel trims right, and in a better place. I was expecting a big...

I mean I guess you could. I just make my 6L80e shift how I want it all the time. It's rather easy to make it shift quick and smooth at part throttle...

I guess I don't know what you are trying to do. The MAF table is using the MAF airflow Fq channel in the scanner. You can change the units in the...

Thats what I was afraid of. Guess Ill have to play with Corvette stuff. But what is weird is how it did change somewhat when I pulled it down,...

This is it. I'm expecting to see something I can correlate with clyair, or do I have that wrong and need to convert lb/min to lb/hr?

Not all OSes will do TUTD, even if your file has all the settings for it and no matter how you set it up. Same as how not all OSes will do flex fuel...

I have never seen performance mode on a truck calibration.

Change the layout so you can see it better. Click the horizontal split and not the vertical split on the upper left.

Well, that's what I thought. But, this is not what I expected to see...and I can't do what I need to do with this.