Activity Stream

Not that this answers your question but I?m new to this also a was wondering what?s the requirements to get TDN tunes cause some have TDN symbol...

Same boat as you except I have a 2016. Do you have the A6 or DSG transmission? I have extensively used HPTuners in the past (talking 15 years ago)...

Alright here's what we got, pardon the two logs I hit the space bar on accident and it stopped the first log which is an irritating feature of the...

Just downloaded the injector data into the truck and ALREADY made a HUGE difference. It doesn't chug at first until it "warms up" and adds 80%...

Hiya. I've got the same problem here. I have to select the hardware as it doesn't automatically recognise it. I select ME17.9.74 as suggested above....

Good Morning Blind, thanks for shooting that link. That helps a lot and explains why I'm seeing the continuity between the ground and Pin A (when C1...

Do you have a log to confirm that all setpoints to enable DFCO are being met? If so, perhaps there are more tables/setpoints you need to adjust that...

Good to know. He said he pulled a stock tune from the repository. Im assuming it was a stock tune for an 09 Colorado 5.3. So what i was thinking...

You got a lot more going on than just some knock retard. You're never going into PE. When you're getting KR it's close to 100 Kpa manifold vacuum...

E550 w/ M278

There's an easy fix for this. Go to -> Documents/HPtuners/Settings and move the license file to your desktop or delete it entirely.

Which car or Platform

I have the same issue on my ats but it then also fried my OBD2 port as well gauge works great on its own but now I can no longer scan or program...

I just bought the same arm mmediately fried my OBD2 port car wouldn't start dash zeroed out unplug and at least the car starts but OBD2 port is...

we can help. dm

That difference between up- and downshift is "shift hysteresis" - very good parameter to use when modifying the shift schedule. The same concept...

Arlington, TX. It is a 20 minute drive for me. Of course have to walk through their clearence outlet store.

any one can delete adblue e66 lm2 its stock file ulocked from hptuner any one can delete it

You can edit the axis values to get as many matching values as possible for each table, then trim off the excess, or interpolate the values from the...

Very rarely will GM use the same OS ID across multiple years, even if there are no differences visible. The same as with any software development,...

Assuming stock air intake tract and MAFs are in place, adjust fueling using, Fuel Tab>Compensation Main. If it has aftermarket intakes, will need to...

I used to make runs to the Talmadge Summit for myself and several associates before they opened the Mcdonough location near my house. Which location...

Dialing in a factory MAF based system with dual widebands is incredibly simple. Screenshot was after the second revision. WOT was spot on, still...

I ended up driving down to Summit and picked up a MPV3. Would have done the upgrade path, but I was in the middle of a tune for a customers truck...

Wrong service number to be able to put a V8 Colorado calibration in it, which you can't do anyway if your only tool is HP Tuners.

Case ground harness or isolated ground harness? And case ground sensors or isolated ground sensors? And is the harness the same type as the sensors?...

So???