Hiya. I've got the same problem here. I have to select the hardware as it doesn't automatically recognise it. I select ME17.9.74 as suggested above....
Good Morning Blind, thanks for shooting that link. That helps a lot and explains why I'm seeing the continuity between the ground and Pin A (when C1...
Do you have a log to confirm that all setpoints to enable DFCO are being met? If so, perhaps there are more tables/setpoints you need to adjust that...
You can edit the axis values to get as many matching values as possible for each table, then trim off the excess, or interpolate the values from the...
Assuming stock air intake tract and MAFs are in place, adjust fueling using, Fuel Tab>Compensation Main. If it has aftermarket intakes, will need to...
I used to make runs to the Talmadge Summit for myself and several associates before they opened the Mcdonough location near my house. Which location...
Case ground harness or isolated ground harness? And case ground sensors or isolated ground sensors? And is the harness the same type as the sensors?...