Activity Stream

Hi All, I updated the Excel file with a conversion to MPH. I am used to tuning GM vehicles so it is easier for me to see MPH with dealing with the...

I'm gonna give it a shot after work and see how much of a difference this causes. I pray that this fix is that simple. If so, then nothing was lost...

Thanks 2XLS1, this PCM is a 2000 model, so are you saying I should be able to just read, alter what I need, and write it in, and then it will require...

https://dotnet.microsoft.com/en-us/download/dotnet/thank-you/runtime-desktop-6.0.12-windows-x64-installer your welcome lol. download this first then...

You are requesting like a half second long downshift. Which is huge.. Try something between .15-.2x ish

Newer software versions don't require licensing until you attempt to write the file back to the PCM.

I appear to be going in circles at this point. I do think you are right GHuggins, something is off thus skewing my torque tables. Any change I am...

That's how the system is intended to run, it's generally sensitive enough to pick up on small minor knock and correct for it. Not much different...

Make sure you are getting a P0102 DTC as 'Current', and might want to add the MAF Status PID to your channels list, that will show you in real-time...

https://forum.hptuners.com/showthread.php?59532-Can-some-explain-VVE-open-closed edit: Injector data looks A-OK to me.

yes that excatly something im looking for, would that be something you would be interested in ? thanks for help

Most of the time idle issues are fueling issues first. A car that is chugging on fuel especially during decel will never have a stable idle. ...

I forgot what error KESS V2 gave. My ECU is not even on there though and I tried the ones that were close. KESS V2 has 17.7.1 r 17.7.3 but not...

Try these channels and get another data log please

Right. That and cylinder pressure limit. Continued testing show a KOM peak of 1.49 so far. But I think that that may be a false reading. It climbed...

Hello guys; I need a tunerd file by hp tuners, I want running on low octane.. how to program gear ratio (the gear/ tire hight wizard), Or who has...

Get a log of the issue and post it up. Perhaps we can see the cause in action.

those users likely used the same password on multiple forums, or, their email has been breached. For those accounts, i've simply been banning them...

ok I did my homework and put the data from the e38 injector flow into the tune of the ctsv. I took the data from the columns that matched and then...

Well, what it needs is what makes the best torque (as far as I know,) but since I can't really measure that, I just want to avoid going off into no...

The knock threshold is not really a good indicator of best timing. It'll start falling off a good ways before any knock is detected. Use only as much...

I'm a pretty old kid, 30.5" tires (not huge mud boggers,) 4.10 gears, 3.35 1st gear (T56,) in a ~4700 LB GMT800 pickup. 220/220 .600 .600 cam...

You absolutely need a wideband, I use zeitronix, AEM is popular also. People who come in here posting tunes and logs get a lot of free help. If...

Thanks. That's exactly what i need. Why didn't I find this forum sooner? geometry dash meltdown