Activity Stream

Thanks both of you, i'll try this when i get from work tomorrow as it's 9PM here and i don't have my garage at home. /Christian

If you can't make the fan run by grounding the control wire then nothing the ECM does will make it run either. EDIT Or, maybe ignore that. I just...

Yeah, they're flatlined at the bias voltage for most of the time. When they aren't reading you can't draw any conclusions about whether it's rich or...

Try this just in case.

So, I would just click copy over selected differences?

There is plenty of info on this forum regarding DD Tables and how they work. Have you tried the search feature? Also, most Gen V ECU's require you...

Y main confusion is it seem the tables that should have the lowest power have some of the highest so just trying to understand this. I don't know if...

Thank you for the answers. I actually se one thing that differs from mine in the settings, table 18040 mine is filled with numbers. I'll try that...

Not much you'd be able to do with it as you would have no way to license your ecm as it sits so you wouldn't be able to flash someone elses file to...

cool what was the problem?

I did just do a VVT delete, so it?s possible I got the wires backwards, but it runs pretty well with the same ECM using the segments mapped from the...

He doesn't even know why that's a bad idea, and the people who do know aren't worth listening to. How's the project going with the no-sensors EFI...

"If it still won't, wedge throttle blade open if it's electronic." WTF

I guess I?m going to hook the MAP sensor into the line from the intake manifold and see what VCM scanner says. I?m assuming if things don?t start...

Was it just today you realized the software I use makes all the same changes and then some as HPTuners? Oh, right, you know and choose to ignore...

Wow, I don't even know how to fix that with an edit. Must be past my bedtime.

ONly use injectors that have full GM data easily available from the seller or a stock GM injector that you can pull the data from a stock GM tune....

I have used the C7 fan and am currently using the Camaro/CTS-V 19" fan, with an E40. Works flawlessly with both (both SPAL brushless). If...

Okay, is there a guide on how to do that?

thank you thank you ill make sure i come back in a few with a better log hopefully today if not tomorrow

People often dig themselves into a hole with this table. heads up. I'd suggest only adding to the WOT /heavy throttle section of the table if...

Works fine when you fail the MAF properly and make it actually be in speed density. Yours is not in speed density the way you have the DTCs. Make...

You will never get rid of all knock. This one is knocking a decent amount. Only pull timing from the spot it's knocking at in the main spark...

Describing a cam with only lift numbers is meaningless.

Try zeroing out piston slap retard and launch retard. Add to idle start up airflow. The Base running airflow might be a touch low looking at...