Activity Stream

Well well look at this......;) I was at the electronics store today and pick up a new arduino as i could not find the old one. It feels like i'm...

Hey, thanks Bill! :pray: I've been studying that page for the past two days. I see lots of info on the 'Upgrade' service, but not much info on the...

I cannot tell you how many "professional" shops I've been in that have this exact problem. It's almost laughable if it wasn't so sad. Many of them...

Thanks for the log list, I'll reshare once I'm done. Going by the car's boost gauge, it is closer to ~300kpa in 3rd gear.

Correct me if I'm wrong, but guys this only effects idle from a throttle percentage. so Your range above idle shouldn't be effected by the ghost cam...

I was able to stabilize the starting voltage enough to log during cranking. It's registering cam sensor counts, so I can rule out the cam sensor...

What is fuel pressure at the rail?

Injectors are FJ675 Standard brand for the 8.1L OE replacement Fuel pump is precision for the 8.1L max of 42gph at 65psi Fuel pressure was 62psi...

I'd suggest making one change at a time and grabbing a log showing what effects of that change were. Don't go making changes all willy nilly just...

buy a credit, license your vehicle, then flash your vehicle.

hi i am new to this but was just looking through some of the files got a dumb question why is firing order different im i missing something

i have a deatschwerks 400 plus lph pump in my 2017 with the lt4 high pressure pump and lt4 injectors. I made over 800 crank hp with a eforce2650 and...

:shrug: 20 year old car problems, my 06 caravan has been through 2 fuel pumps, 2 radiators, 2 power door locks, etc lol. Somehow the fuel tank handle...

With the changes you made.. Be sure it isn't going into PE too often on the highway.

And not just his speed, how does he get to speed, how does he drive if in "highway" traffic? Does driving nicer get you back to the epa numbers?

MPVI3 scanning is likely going to be better for EECV, MPVI3 editing/flashing are going to work similar to MPVI2. If you have one of each device we...

post the .hpt file, as long as you have an MPVI2, MPVI2+ or MPVI3 connected you should be able to save the file AFAIK.

You would need to purchase the MPVI3, credits & smart access cable first install the smart access cable & read the stock ecm, then order the dodge...

We do not take sales over the phone, product orders can only be placed online. Its been like this since day one(20 years).

Yes, thanks. This is what I am now considering............................

Yes, I get it. I order 99.9% of stuff online without ever calling anyone. But the pieces and services I need are not all that obvious. For instance,...

That logging list won't work, many important things are missing and many important parameters are only updating 2-3hz-- not enough to really see...

ok ill try to do some data logging

Ive asked about the injectors, says they are stock injectors from an 8.1l, new standard brand from oriellys, not sure on what was said about fuel...

It's a Eurospec 7R running a Vortex STD. I managed to raise the torque limiters and adjusted the wastegate feedforward tables. I've attached the...

will this work with my automatic?