Activity Stream

Thank you for your reply. That was the first thing that I did was to check all the grounds. Now this morning I backed it out again and it died. I...

Open a support ticket.

have the ecm flashed to the vin/os pairing you want via tech 2 or similar oem style flash device, then simply read, license & tune away. You...

Thanks for the reply. I found the address in England. It turns out that these E90s I have are not supported by HP tuners. I will order an unlocked...

u can change the values from sec to min to hours

if edcmat mentions things to change then they are worth a shot, the idle correction airflow does work well stock even when modded if the rest is...

Need to be logging injector on time. It does not look like the VE is off 30% numerically. Almost looks like the injectors are different than the data.

Im from saudi arabia but Do you know someone who is good at programming?

The truck is tuned so they must have changed it but what I didn?t get was why it still was starting in 2nd with the table looking just like the...

All I have to say is wow, the support you guys give in amazing, I spent most of my evening chasing wiring and values, not knowing what was cut up in...

It has a separate controller, Smoothboost I think. But it still does not show boost in logs. I've tried Sensed MAP on or off, no luck. I tried...

Check for loose powertrain ground on the rear end of the left cylinder head.

I should also add- I have a catless downpipe with a straight pipe exhaust, I'm not sure what has to be changed in the tune file to adjust for that. I...

yea the flex sensor can only adjust when the stoich is correct, just go back to stock values and double them if ur doing the double stoich half IFR...

Yes it is NA at the moment and it is on open loop fueling. Im using aem canbus wb but wired trought the ac pressure sensor.it is reporting same as...

You will need 2 more credits. 2 for the file in the PCM and 2 for the file you want to write to it.

Is this a N/A engine setup right now? Going to need more info but if its idling at 13 right now do you have any narrow band oxygen sensors or only a...

Stupid questions receive stupid answers.

Do yourself a favor and train your brain to think in Lambda. My first thought is to make two separate graphs, but if your wanting to add both...

use the 'go advanced' button and upload the tune and datalog

Okay, no start but cranks, no 12v signal out of the pcm @ pin 2 blue, checked and remounted all grounds, have all power connections to pcm full...

Would this be pin 6 and 14 on the obd plug? Should mention I ordered the 30-0300

Heat soak, changing fuel rail pressure, amount of fuel in the port that is liquid vs vaporized. It is a useful metric. Yes stuff is mislabeled and...

I don't think your 4X4L table is stock. I looked at 2017, 2018 and 2019 stock files and they all look like this. 6th gear is locked out of 4-low.

First you cant mix 06-07 classic ETC hardware/calibrations with 03-05 ETC hardware/calibrations.

Sorry I missed this earlier... I never use the special functions to put the vehicle in open loop or disable fuel trims when I'm logging, I'm not...

have any of you guys seen a ve that looks like mine, really this things is god awful. smh.:doh:

https://m.youtube.com/watch?v=eOd_IudUkgM This guy has a few videos on how to do it. I?ve done it on my car. It?s not that hard if you follow the...