open loop tuning ok
Is there a write up for that? Or is it histogram logging errors and multiply by half?
Guess I spent too much time learning maf tuning, and never found Regal related...
Type: Posts; User: crazyguy03
open loop tuning ok
Is there a write up for that? Or is it histogram logging errors and multiply by half?
Guess I spent too much time learning maf tuning, and never found Regal related...
yup 2003
thanks guys This helps all of us PLX users out there
ok thanks swigs, Im gonna try that.
However my wideband reads a AF as rich at 10 at times when my trims randomly go 16.4 My only guess is that its a cat test. I just cant understand why I never...
So far it looks like I have to install a wire in the connector that allows wideband output. Then attach that to my hpt cable in spot "1"
But its how to get hpt to read it, scan it, and make...
So I got my plx sm-afr up and running
Now when my trims go 16.4 it reads 11s and sometimes 10s
At wot, im hitting 11.6, so basically its the opposite of what I thought, its actually choking out...
im trying.....
vacuum seems a bit low even with my cam, but boost seems about right
Bingo! [PID.11.PSI]-14.7 works like a charm!
Now how can I implement this into my histogram?
I have a gen5 3.0/stock rockers again/full size IC/ 42s/N* and s1x cam
My issue is and has been the start up driving of my car. It will start , rev up and down for a few secs and settle in. Start...
I just cant get it to work, or Im doing it wrong :shrug:
Application: All vehicles that reference MAP
To allow you to view actual boost pressures above atmospheric pressure you can simply make...
Thanks boss, I wanted to see if anyone with a 01+ regal can confirm that those performance tables are automatically used based on TPS or etc...
current tune stock? 2003 regal trans settings
blowing the dust off.... I use beta any trans expert wanna take a look?
also what good is the perf shift tables when I have no perf shift button? Is it automatic based on TPS?
I know I dont have a performance shift button but I still have the options in the editor for it.
I have a s1x cam and would like to set up my new trans with a good tran settings
I been taking...
Thanks Bill
How do I share my tunes with others who are NOT using beta? Is there a way I can format my save so that it will open?
What are my options
Thanks
bob
:banghead:
do u need to disable PE when using eddies table modifier? I was hoping to take a scan of my roadtrip and just using a TPS filter, pe is disabled until 38%, so i would filter 1-37? not sure if that...
here is the table text
thanks for taking the time respond. Yes my car has 104s gapped .05 smaller than stock, .045-.050 at times trying to see what works best between kr and mpgs. so far still no kr and still 230 a tank....
i just want to add, that after my car had been running, everything seems to work out and besides my trims spiking, they are within range.
if I use my maf, would trying to VE tune help? or a open...
Ok here goes my mods
03 regal gs
105 crow cam springs
S1X cam
fullsize intercooler w/3.0 and 42s injectors
N* with LQ4 maf
My problem is simple. My tuning is all trial and error. Please help...
please show me were I can obtain all these applications so I can use my HPT to turn this off. Its quite annoying and possibly messing up my maf tune with my new cam
Thanks!