Search:

Thank you Sir...

Hi,

Looking for stock 2011 Silverado 5.3L, auto, Thanks

Hi All,

Got it done :D now getting decent pooping after 3000 rpm, and put some nice chopped idle effect to it as well.

Thanks to all who have tried to help

No Sir, but i know they can pop loud without Whipple as well

Thanks, apart from that dose spark tables require low timing in low load areas ?

Thanks, but I cant seem to find this table under my tune !

Attaching my current tune file with only JLT intake values (Editor Ver 3.6.26). can you pls guide me where this table to be found?

and how that's going to help !?

Not sure where to find this spark on decel table on 15+ !, as what i heard it's all torque based with these cars.

Shouldn?t be more settings required to be adjusted then just disabling defco?

Hi,

looking for some help/ suggestions on how to make generally pop on decel ?

Thanks

Hi,

Thank you both uarp & jay for chiming in.

As i mentioned the exact problem happen after long tube install. At first she throw the P0052 code (bank2sensor1) the CEL was there, and would not...

Also looking at the (Inj PW) tables, how to know where about the idle/cruse/highway or wot areas are in case wanting to adjust ? or its more like going to effect the entire conditions ?

do we go...

Hi,

Due to many O2 sensor (P) code issue after long tube install, it was a nightmare driving the car during normal conditions, as it will buck and jerks while in (CL) somewhere around 2000~3000...

As Hemituna posted earlier which what I think the main problem with Big Cams swap was " lack of vacuum " well Comp Cam 274 in my case dont know if same for other Cams. And before posting I went...

Hi,

Just came back with the owner after a good long drive, and happy to report that she is back as normal and almost stock like driveability !
No noticeable surging No idle hanging and most...

Brother Sultan,

I know its tune related at the moment and soon will be solve, as this is the reason for my post seeking help and guidance from more experienced members. I am in no means a tuner by...

Hi,

Well hope you got over it by time my friend, but as to my situation dont really know how much lean or rich she is running because I know and my mistake no WB is present at the moment !,...

Just to report back, and actually those small number never worked out on all 3 tables !
could not fire up without gas paddle and if starts she can barely stay on for a short time and dies ( log...

The owner returned back the factory TB and that did not help, so now we know its not from the BBK. Will try to adjust these 3 tables and report back later tonight. Thanks

Exactly what I doubt as well, because it was on the car before the cams and Diablo canned tune with no issues. It just started after the cam install and to explain more the behaviour I will put it...

Actually I don’t think it’s the TB, because it was on the car before the cam install with no issue. Thanks

2012 Challenger SRT8, 6.4L Manual with CompCam 274 & BBK 90mm TB. I'm trying to solve this problem of stalling when coming to stop. I have bumped up all my idle tables and TB air flow but with no...

Hi,

Guess not !

ID's or any other company are not his best choice atm, as he already purchased them from someone along with other parts on a good bargain deal.

So it leaves me now with only...

Hi,

Yes that seems to be the ones, but as I mentioned before could not find any solid/proven info or data such as offset/pulse/timing ..etc.

looking for someone to share their data on them...

Gents,

helping to dial in the above injectors on a friends truck. could not find any info or data sheet for the given injectors only the p/n 306008 !. seeking any help or tips to dial them in.
...