the throttle follower tables under Idle/Airflow influence how the IAC stays open after throttle. I have had the best luck playing with decay(rpm) if IAC stays open too much.
Type: Posts; User: joefus25
the throttle follower tables under Idle/Airflow influence how the IAC stays open after throttle. I have had the best luck playing with decay(rpm) if IAC stays open too much.
did you ever figure out anything here?
I am wondering if you found a solution to the "warm" start issues you were having? I have had the same issues for a couple years but I have still not worked that part out yet. I am also wondering...
Most older mopars change speedo through ABS module. Need a Snap on or something else to set "Pinion Factor"
Mine did work for a while.... it actually worked fairly well minus the fact it was missing som pid's. I imagine they will get it working again. I have noticed they have updated the tables in the...
I have run into an issue when logging with the last beta install that broke something.
I can not re-poll and I can not add channels. The repoll goes super fast and picks up nothing then of...
Still haven't found out anything new besides now I can't log again...
I had a support ticket but all they had to tell me was that there's a lot of bus traffic..... no fix though...
I hadn't...
Did you ever figure anything out on this? Mine does weird stuff too and I don't understand why.
Did you ever figure this out? I am having similar issues. It will not upload my channel config to the device and it wont log anything standalone.
46re can only be "firmed up" mechanically. No electronic pressure control.
Thank you!!! I greatly appreciate it, glad it was simple!
Yes, I know the injectors are too small, I just need it to be able to pull in and out of the shop right now....
Hello, I have searched to no avail. Any help is appreciated.
It idles ok but when pushing the throttle it will get to right about 1600 rpm and it seems to hit a fuel cut or something. If you...
Sounds like a worn TV valve in the valve body. How many miles on it? If it's got 150k+ talk to a transmission guy before you try to tune out something that will never work. Those transmissions are...
So far not supported. Not sure what it takes for different jtecs or otherwise but the PCM I have supports minimal scanner functions (beta).
56040145AG (99 Dakota 5.9). Can not set sync, can only...
Anyways, seems that hpt can not read DTCs or log PIDs on this ECU. Is there anything I can do to get some of these things added to the next beta or something? I am having a hard time tuning this as...
I also want to know whats up with these EMCs. I have trouble logging useful info and figuring out what some tables even do. A bit confusing and I really wish they would put a bit more time into the...
I am not sure if I have done something wrong or my PCM is not fully supported but I have a few questions:
1) I am unable to read DTCs in the scanner, but they will clear... Has anyone seen this...
I had duty cycles set to normal, then I changed the DC to 99 just to see if it would apply correctly. Pulling trans back out this morning to make sure it's nothing mechanical.
Well, it is from tune file. I dont know what my problem is either....Maybe there is issue with this pcm? Seems to be usual situation for what I work on...nothing works right.63646
63645
I did this and it still applies in 2nd and 3rd
Ignore some of the weird settings....
Was testing. to see if anything was effected.
By the way, it is a 2900 stall converter, 4t65e w/ transgo shift kit and did a progressive boost valve
I am having difficulty with converter lockup on this 01 regal. If anyone can help, let me know!
Built this transmission, put a high stall converter in it. I can not seem to get 2nd and 3rd gears...
Haha I knew this would happen.... I do still look forward to HPT version of tunability on JTEC and if it's anything like the rest of their stuff, even though I am deep into the competitor's version,...
Any news on JTEC/JTEC+? Honest answer here please, will it ever be supported? 1 year out? 2 years out? Wild guess? Never?
Thanks HPT.
Yay!!! I can read my 99 5.9 pcm too! Good job fellers!