hi all,
i am tuning a 2018 s550 A10 it has 150mm throttle body from whipple i scaled the area with respect to their 132mm but i am getting negative results if i blip the throttle i loose throttle...
Type: Posts; User: jarrah
hi all,
i am tuning a 2018 s550 A10 it has 150mm throttle body from whipple i scaled the area with respect to their 132mm but i am getting negative results if i blip the throttle i loose throttle...
Hi everyone,
I have a 2017 roush mustang with headers only. Pulled the stock file and made some changes to the MAF Based on the STFT they were pulling 10% fuel......corrected this wrote the file...
Hi evan,
Any plans to crack the transmission part of the tune....also i believe there is more tables missing from engine side and torque management related tables....is there any chance to have...
also we need more access on the logger, everytime i log vtc soleniod the scanner crashes.
also there is no access in the logger on commanded afr
also no access on LTFT disabling
VTC Tables are...
all are 2017+
hi,
are you guys planning to crack the transmission ecu, also we need control on VTC on cammed cars, there are couple of timing tables missing too IAT, ECT , MBT , Burn rate, Fuel data Stoich is...
hi,
guys I am facing some issue disabling maf in the tune to tune speed density car goes into 4th the moment I put in Drive when I enable maf trans work as it should
bill is saw the data however the delta P are different then stock tables
I am looking for some help, does anyone have the dw95lb injecotrs data for gt350 2015
dubai, why not a good idea?
hi,
I need someone to help me tune a ford gt350 turbo, remote tuning and I will pay for the tune.
can you post the tune greg over here
so the harness you have is for auto do you have the transmission harness 8l90?
ask them to send you the file they use in their calibrations
make long story short we have a car came in with a strange issue, it has ls3 swap with e38 ECM, car starts fine with no issues how ever it goes into limp mode as soon as it starts. after some digging...
any inputs
83390
here is a log of the current issue
changed the PCM with no luck
To make long story short we have a car came in with a strange issue, it has ls3 swap with e38 ECM, car starts fine with no issues how ever it goes into limp mode as soon as it starts. after some...
upload the tune lets see how we can help you
KeETQC_Cf_ HighPresRatioClamp
KtETQC_m_AllCylAPC_ Low
KtETQC_m_AllCylAPC_
KeETQC_r_ MaxUseablePresRatio
ETQC_m_AllCylAPC_ High
guys you really have to test on some operating systems no matter what you do on the area set it to 8000 or 3000 it doesn't make any difference, there is a table I contacted hptuners similar to what...
Do you mind to share how to do it?
can hptuners add tachout put type and resolution for gen5 stuff for swaps purpose
https://www.facebook.com/827544950691660/videos/1478703885575760/
Bill can i email you guys the videos so u can post and the slip