New build just brought to me for tuning.
waiting on confirmation on what HPFP is in it and what Cam lobe.
My main question is should i be able to read a FPCM on this car? I cant.
Lift fuel...
Type: Posts; User: super6ute
New build just brought to me for tuning.
waiting on confirmation on what HPFP is in it and what Cam lobe.
My main question is should i be able to read a FPCM on this car? I cant.
Lift fuel...
07GTS, some good points there, I will try setting the diagnostics on for Flex hopefully its that causing the issue.
yep thinking about it now I should have a slope in the IFR table.
I haven't had...
Hi 07GTS. Yes the file shown is the current file that the car is tuned on. It won't run with the flex turned on.
Injectors are scaled back around 30-40% (127lb is hard limit on flow rate) It runs...
105843105844
2014 Holden / HSV GTS with LSA engine.
Just wired a flex sensor in. Once enabled I'm reading 3% ethanol. But as you seen in the attachment, with Flex sensor set to "enabled" the car...
Quote from 06300CSRT8 from the above link. For my future reference. Makes sense now. Cheers HaasExp.
"The correlation here is as follows: first off the RPM error is opposite what you think in the...
100838
RPM error axis, you would have to think the negative values (example -500rpm) are under desired RPM. Hence non neg values are RPM over desired RPM.
If this is the case why are the table...
Just got mine sorted.
I deleted Beta. Re-downloaded it. (wouldn't update to the latest version using the method via the "help" icon, then "about"
Then as tris909 mentioned, individually delete...
Same deal here.
Was just Beta doing it for me, now also happens on stable 4.6.
Going back to an old laptop with an old version
Bump.
Still Chasing a pre 2015 TRD Supercharged file if anyone comes across one.
Cheers
Hi, As per title if you can help I'd like to look at a few stock 5.7 V8 petrol Tundra files.
Circa 2013. NA, and TRD supercharged if possible.
Please PM if you can help.
tia.
PM sent
Post Edited. Added tune file/ stock file and current log of error.
Have ruled out indicated torque being an issue now that we are logging things a bit better with latest Beta.
Having an issue with this code coming on at cold start only.
Have just fitted the Maggie 2300 blower. See attached log, @21 secs indicated torque spikes and I believe goes higher than permissable...
Yep, It doesn't always come to that but occasionly it's the only option.
Is it likely we might see some more tables in future for injector adjustment?
The current Inj Pulse Mult (12327) table seems a little primitive for calibrating a larger injector.
I?m not sure what you mean Bill.
PCM locking is the biggest downside to the Hpt software. It?s generally used by those who feel the need to hide their incapabilitys and laziness.
I have no...
So another software provider has just released PCM unlocking capability incorporated in their latest Beta.
With the number of Hpt users locking up their crap tunes I wonder if we can expect this...
4L80e fitted. Having trouble locating a matching file that will swap with our OS.
OS 12592433. VZ Commodore 5.7 DBW.
Have tried 12592618 (05 Caddy) which I could use an 05 silverado file for...
Where did you get to with this Molch?
I once had a bad drive belt idler bearing on a barra turbo cause the same thing you encountered. Wasn't even very audible without a stethoscope.
If not...
Bump again for whipple 132mm tb data
EDIT: https://www.hptuners.com/forum/showthread.php?65098-2015-Mustang-2-9-whipple-tune&highlight=mustang%2C+132mm
2017 Mustang GT.
When should I be doing a write entire and why?
Thanks
Thanks mstang. Those dwell times go along with what I have.
The main issue is I need to know exact flow rates at x opening periods.
Bump.
2006 SRT8 Jeep with NGC3 CAN Controller.
Just changed from Bosch 2000cc due to E85 issues. I had the cal for those fairly spot on.
Does anyone know who can characterise them for use the this...
I should add, seems to be ok after 20 min of running. Only seems to fault during warm up period.