Search:

thank you!

Hi, can I use dw 16U-00-0090-8 injectors on a p01 ecu?

Know is making 470 whp but wanting to get close to 500, at 5000rom and 11 pound of boost the injector duty cycle is around 109 percent

OK, what about HPI injectors? are they good

OK, what about HPI injectors? are they good

Hi, I have a 2002 Silverado 6.0 with a 7875 turbo and my injector duty cycle is off the limit so I decapped my ls3 42lb injector and need help with the flow rate.
thanks

sorry the last number is a 8, 12580698 I did just what you said with the linear and the maf codes to mil on first error, do I mark the ses enable or I leave it blank

the map sensor number is 12580698, this sensor was working ok with the linear calibration 94.43 of the old sensor until the OS change and I tried with that calibration too, the injector on it are...

I removed the maf sensor and the truck was running ok, the map sensor is a 2 bar gm sensor and this is the original file of the truck

the truck was running perfect until I changed the OS, ok I changed the maf codes and disable the map sensor code too

I have the maf failed in No Mil Light and the map values what do I need to change

I changed the sensor linear and offset

Yes, I changed the VE table

Hi, I just wrote the 2 bar system to the truck and barely starts after a few cranks and shut off, the truck was fine after changing the OS, I attached the tune file
thanks!

Thanks cobalts! I m going to test it

the table I have goes from 0 to 80 in kpa vac

I m running 58 psi

Hi guys I m looking for short 60 lb siemens injectors the IFR or a tune file with all the data

The problem is when I m logging maf vs afr error the data I got is irregular and cant do the maf calibration, Im trying to do this beceause I changed the cam and bigger piston diameter

Hi, on my ecm looks different 75359 75360

Hi guys, how I disable main VE in dynamic airflow for MAF tuning only in my 98 4.3 blazer s10

Hi, that way you can use eq ratio from serial ports?

Hi guys I connected a innovate lc2 but the serial channels of the sensor disappear when recording any help with that please