ok thanks
Type: Posts; User: stick8555
ok thanks
or is it just a switch
and body got a phaser delete tune no other mod just need to turn it off
i can't find a OS 12592618 with a 4l80 in the repository 04-2006 Chevrolet Avalanche 2500 trying to seg swap an cady
bump
car is a 06 zo6 with a 447 stroke in it been running great and all of a sudden it dies when you push the clutch in above 55 mph and only above 55. car starts good idles good cold starts good. what am...
just an update maf was bad but now we have some kind of adder opening injectors to much first pull was fine on dyno then pump don't boost fuel 300c pumps. last data log is on the street with injector...
got a ctsv we are trying to see if i have a bad maf for some reason cylinder air mass goes way up at about 5500 rpm but boost does not follow. air mass commands the injectors wide open we have...
we go some of this fixed with new pumps we have a a 2.45 and 1000fic injector in it. got it back on the dyno after some street hit and are now see the car go full rich above 5500 and i duty cy got up...
so i cant find vats on a 2007 cts v6 i see in diag 3 codes to disable is that what i need to do???
i have not really messed with the v6 cars much i dont see an os option nor do i see anti theft shut off.
we found some of it got it back on the dyno an fuel pressure is not holding good its dropping out . didnt lean out on the dyno with less load to turn the drum put some load on it with the eddie brake...
i have done all them yall talked about when she get hot it goos nuts
so we have an 09 ctsv that has a 2.45 upper and i have addeed the log. the maf is stopping at 86.69lbm for some reason and i am seeing engine tq stop at 640 like i am hitting some load limit what did...
why not segment swap it to a 80 tune
09 ctsv cady 2.45 pulley reinforced brick fully built bottom fic 1000h injectors, got her out to do a base street after the built and i see the injector going to 80+% on the data log. pump is tuned...
09 mustang was being programmed and the customer opened the door and foot hit cabe now it wont detect or do anything changed to new ecm still wont talk could we have kill the bcm on passenger side...
We are working on a 16 st with a 58 mm turbo and are work towards unlock or turning off all boost or limiting of any kind
I need to look but I have 16 st 2.0 speed file
found the fix replace throttle body. Was some off brand snake eater nick williams copy car made 597 na at the tire .
Very far from stock ecu maf and vve have been updated wide when cruzing show 14.5 afr and wide open is 12.67 with the injector data you supplied. thank you again for that.
cool start is great i cant seem to get enough air to it on hot start. data show 31 to 33 % throttle to fire it or if i clear flood it and let of it fires right up hot or cool so still to much fuel.
thanks!!!!!!
will need to change the min pulse or the offsets ?
I am working on an 06 zo6 vette has a nice 447ci motor in it and the customer has found some lsa injectors. Now he put them in before i got the car and i am having one hell of a time getting the...