Does that mean you changed the entire table to 500?
Type: Posts; User: mrfister77
Does that mean you changed the entire table to 500?
Yes I did use the Sonnax boost valve, Yes the forward sprag is correct. The valve slid out smooth and steady, but did not "fall" out or slide quickly as if loose in the bore.
I am wanting to...
Yes it does shift fine manually. Yes I air checked every time the manual said, according to my notes. I have had the pan down twice and the fluid and pan were perfect, no metal or material of any...
I'm guessing it's more than likely builders error. I just thought I'd take a shot in the dark. I'm sure I forgot to do something, I have no short term memory. After 3-4 sentences into a conversation...
Here are some scans. Thanks so much for any help.
I broke my trans after about 18mo after purchase. It is a level 3 Raptor with 600 hp/tq rating. It is in a 2002 Silverado ext. cab 2wd 5.3 with heads cam etc. except intake TB. Anyway, the input drum...
2002 Silverado ext. all bolt-ons cam, heads ready for Pro Charger.
I'm still playing with the fan table and I still can't get the fans to keep my temps below 190 even. Before the harness to run off the ECM the temp never got above 187 ever. Also the fans were...
So the prob. I'm having with my temp climbing while standing still is the lack of high speed wire? The harness I bought only came with the pin 42. I was just going to ask why my fans were spinning...
Thanks to everyone for all the help I have graciously received from this site over the years. THANKS TO EVERYONE VERY MUCH!!
OK, that's great. Thank you so much. I was all lost in the sauce, I thought that the series/parallel was an option under fan type. THANK YOU!!
What will that do?
Thanks very much!! I've been trying to do that forever.
I wish I could, I don't know how. Sorry, I'm trying to figure it out.
I'm not using them yet. I got the beta and fan options are the same.?
Oh. OK thanks. E-mail sent.
I bought the fan harness from ls1fans.com, tune is attached. Thanks.
I have the 2.22.3xx version, is that the new one? Also am tuning a 2002 Silverado 5.3. Will any of the file or config info help.
Thank you. 1 more question, the harness has a note that says if you don't run it on series/parallel it will melt the harness. Also I don't have the A/C Recirc Option to Fan #2.
All I have is the...
OK, so I bought a fan harness for my '02 Silverado to work with the F-body fans and be controlled by the ECM. The harness says to set-up the tune to use the series/parallel option or the HP Tuners...
Can I get help installing the hp tuners disk on my laptop? I just bought a Sony VAIO with windows 7 home premium 64 bit, when I try to install the disk it says something about .net framework. I went...
No worries, I was just curious. Thanks for a GREAT product, service and support.
Will it ever be?:)
I see the 3.6 eng. but not the traverse in the supported veh. list. So can it be tuned? 2010 Traverse LTZ 3.6 V6 6 speed auto.
OK! That makes perfect sense. Thank you for your very informative answer. Can I still use the Del. torque to reference tuning changes? Even though it's not right it would still yield the same...