Anyone got some pointers on IMRC delete how to on this platform. I?ve been playing with dialing in the mapping tables but just wondering what?s the deal with IMRC.
Type: Posts; User: Lone_mfkn_wolf
Anyone got some pointers on IMRC delete how to on this platform. I?ve been playing with dialing in the mapping tables but just wondering what?s the deal with IMRC.
anyone ever dealt with some backfire type sound at part throttle drive?
only at about 35% throttle 9th or 10 gear only. seems to go straight to mapped point 25 on the spark timing.
21 gt tuned on...
Anyone out there offering 6.6 tuning?
Got a truck just needing some tuning.
I meant a f-150, those supported?
Sweet!! I’ll will give it a try Tomorrow and report back soon
Bill@hptuners I’ve got a 21 coyote and would like to try some things out :hi:
Hello guys Just a quick question wondering if anyone has dealt with this before. I have a 2008 Corvette after TCM flash it stays stuck on fourth gear. Once I flash the stock tune it works normal any...
Yea I’m trying to comprehend that system
I’ve never done map tuning on Fords. Not sure exactly what tables to mess with.
I am also trying to find a good source of where to do some training for...
Ok ok I’ll give that a try
Man it’s been kicking my behind
Hey guys I?m out here chasing my tail, have had some f-150s before but never a mafless one.
So I want to clean up the fueling for the drivability. Any pointers anyone?:banghead:
I tried doing the...
Worked out great bud
Thanks for the suggestion and help.
Ahhh ok ok I’ll give that a shot
Thank you for the input
I’ll give some feed back
Hey guys just wondering if there?s any way to get the A8 trans to auto shift? For example on a manual or sport mode?
As if I was to drop gear and go WOT can it actually shift on it own?
If so what...
78/75 1.25 with 4 in exhaust
It won’t hold it anything higher than 2900
MSD 2step 8733
Set at 2600 rpm so far
Hey guys I have a turbo 4.8 with a 3600 stall
Just installed a 2step and wanting to get some intel.
Im building 2psi off launch, any changes you?d guys recommend to help me build a bit more of a...
Have the line to the bottom of it
Turbo is a 78/75
I’m thinking of just moving it closer to the turbo
And replacing it with a new one while I’m at it.
@kingtal0n
Thanks bud I am going to look into that ASAP
Also will install boost gauge here very soon to verify.
Map sensor came with linear offset but you are right.
You just never know. Thank...
44mm it’s mounted on the crossover pipe closer to the driver bank.
This is a single turbo system. Turbo is mounted on passenger side.
Hey there guys just a quick question
I have an old truck with a boosted 4.8.
I am constantly seeing map sensor going all the way to 235kpa
Just wondering that would put me at 19psi right??
I...
@5fdp thank you will give that a shot
@blindsquirrel lol I getcha
Thanks for the input guys
True
I’m just trying to get the closest to stock drivability
Would have to upgrade the map correct?? If I go 2 bar
Do you think fattening the MAF up top will work with 5lbs?
Quick question guys
I was wondering if I can setup in speed density and still run stock MAF like up to maybe 7k hz
Then from there start fueling from primary VE?
I?m thinking I would need to fail...