I was thinking it would be the same as a CTS of the same year, however I had a friend with a similar issue a few years back with a cts, I contacted him to see if he had ever figured it out and he...
Type: Posts; User: 99gsracer
I was thinking it would be the same as a CTS of the same year, however I had a friend with a similar issue a few years back with a cts, I contacted him to see if he had ever figured it out and he...
It's not. Her father has done the chains and all the sensors already. Not my first rodeo with this code, just haven't had time to dig in and check camshaft play. Its either going to need the washers...
Trying to disable a code in a friends SRX so they can use their remote start again. Tried every no MIL setting and disabled setting and code still sets P0391 if it matters. Any help would be...
Forcasting possible snow mix for saturday so this may be on hold till the spring. I want to put it away before the roads get salted.
Correct. Only "had" 2 o2 sensors sensor 1 for fueling, sensor 2 for cat effeciency. Stock they are in the downpipe. I'm running SLP headers so no cat, no egr. Have those codes set to not repaorting....
Think I figured out my hot restart issue. My o2 sensor was messing up and I didn't care because I was forcing closed loop while scanning. I wasn't scanning when the problem happened and i still had...
This is whats in it now
54756
I can compare to my stock 99 file. My current 99 file. My original file that came in this car and several in between files if you would like to see any others for...
Just got a 2000 regal gs up and running. I don't remember 99 being this much of a pain in the A to dial in. The rundown on this car: I bought the car a year ago as a rolling chassis that had been...
$100 for credits and disable all EVAP codes or keep replacing the vent valve or relocate vent valve or the filter depending on your setup. Don't know what your driving so don't know where your vent...
Injection and spark do not happen at the same time. I'm pretty sure for what he is trying to do he needs cylinder one spark signal. I think slipping some sort of terminal over the cylinder one...
http://www.hptuners.com/forum/attachment.php?attachmentid=54733&stc=1
This is the schematic for your ICM there is no cylinder 1 signal its calculated within the ICM based off of the crank and cam...