Again this will go to a professional tuner once the hardware issues are fixed!
Type: Posts; User: Richard F.
Again this will go to a professional tuner once the hardware issues are fixed!
Until 2 days ago the car had no physical MAF sensor, but the engine ran fine. Added the MAF to start tuning it as people said that wasn’t start with than the VVE, but was having transmission shift...
The car has a Dakota digital HDX, I haven’t had any issues with them in the past on swaps. The MIL output wire from the ECM goES directly to the Dakota Digital control box. I think edcmat may be on...
I am no where near an experienced tuner lol, it will go to an experienced tuner with a dyno and let them dial it in properly. I wanted to get the engine started and idling to work out any potential...
It is a LS Swap with a 2.9L Whipple LS3 and built 4L80e. It's using a E38 ECM and T42 TCM controller flashed with a 2008 Savanna Van OS; the VIN number is 1GTGG25KX81151305. It has 80lb injectors, so...
Bad E38 ECM?
I have a constant MIL light on with no DTCs present at all. I thought it may be a harness issues, so I ran my own wire from pin 68(J1) to the instrument cluster, still no change. The ECM is...