Make sure you check for vacuum leaks and ensure everything is hooked up properly. Try this file and see if it runs any better. If the CVPI injectors, PCM, and sensors were used it should run pretty...
Type: Posts; User: ssikora1973
Make sure you check for vacuum leaks and ensure everything is hooked up properly. Try this file and see if it runs any better. If the CVPI injectors, PCM, and sensors were used it should run pretty...
Unless your car is moderate to heavily modified ( Supercharger, Turbo, intake-heads-cam combos) there is no need to mess with the MAF curve as you can end up with big problems, part-throttle...
Here's one from an 03 Cobra that is modified.
04 Cobra tune.
Here's one from a 2007. Hope this helps.
I have a stock tune from an 04 Cobra and one from an 03 that is modded. Hope it helps.
Anyone have a 2011 Crown Vic Police Interceptor I could get a stock read from? I had thought there was one on the repository, but since it is gone with no ETA as to its return, I thought I'd ask if...
With these abrupt and un-announced changes, the job of guys like Bill, and Keith who face the customers in the public forum just got exponentially harder. I agree on sending a mass email ( Or even a...
A cab error generally means that the downloaded file has corruption in it. What I'd do is completely uninstall your existing version, redownload a fresh copy of the software and reinstall it. Make...
Yup, I went to log on today to get an updated copy of my software and the 3.7 beta and was greeted with this new site where I had to do everything all over again. The link I had to the beta ( Which I...
I used to have access to the 3.7 Beta download but it has disappeared. I got a new computer because my old one died and All my tunes are edited with this particular version and I cannot use 3.6. Can...
I have searched the internet and this forum on how to tune my DBW Crown Vic Police Interceptor to be more like a cable operated throttle. I've found a lot on where to set it on boosted vehicles, but...
Any time you disconnect battery power for longer than a few seconds, you clear all the learned tables in the PCM and when you reconnect the power and restart the vehicle, the PCM now has to relearn...
Disconnect the negative battery cable and place a cloth or other insulator on the battery terminal itself and hold the actual negative cable up and away from the battery terminal. Connect a jumper...
Here's my dilemma. I have a 2006 CVPI ( Crown Victoria Police Interceptor) I'm tuning and the original PCM calibration had FCFE6P9 operating system. Well, that PCM pooped the bed and I was able to...