Serv No. is 12607096
Type: Posts; User: * _ *
Serv No. is 12607096
I'm not saying you are wrong, as all I am saying is this ^ is the part that doesnt make sense for the purpose of using HPT.
Creating something that wasnt factory is likely what this is, so finding...
09 thru at least 10 had the option for the 5.3L. That I can be confident to say, assuming the dealership at the time wasn't blowing smoke because I was grabbing a quote for a 2010 for a V8 spec'd CC...
I'll have to go physically look at the tag as I am not aware (nor could find it) of it being stored in the HPT file anywhere. The only thing that I can see in the file to which matches anything in...
What I am doing is a Chevrolet Colorado I4 Auto RWD to LS Manual RWD swap, not trailblazer.
I am swapping the engine harness out for a V8 specific harness, removing the auto transmission in favor...
Not sure what the incompatibility issue is, but I'm thinking that it is with the BCM & Instrument Panel Cluster?
What I am doing is a I4 Auto RWD to LS Manual RWD swap. Would the 12678512...
So, if I am using a 2007 trucks 6.0L or 5.3L V8's E67 PCM in a non eight cylinder colorado/canyon from 2008 to 2012, I still need other special programming functions that HPT is not capable of?
Based on what I am understanding, & correct me if I am wrong:
If you have a 2008 to 2012 Colorado/Canyon with the I4 or I5 using any transmission option from factory & wanted to swap to the V8,...
i dont have much interest tuning out side of the big 3, so it might be best to just keep with the current product that I have.
Thanks!
I have the MPVI & would like to know if there are any major advantages/disadvantages in obtaining the MPVI2/MPVI2+ setup?
My vehicles are all under the year range of 2014 & I would like to expand...
Doing an update did not resolve the issue with the 08 & 10 colorado cruise control after a tire size correction was made.
intersting work around. I have lost cruise control after correcting for the tire size with the 2010 & 2008 colorado. Battery disconnecting did not resolve the lost cruise control function & I would...
HPT does not support BCM tuning. I don't know what to suggest in order to execute BCM tuning for GM vehicles as a garage hobbyist.
Is there a possibility to have the trucks 2.9L PCM benched flashed using Tech2 software to install an OEM 5.3L Colorado baseline file prior to using HP tuners software? Can the folks at HPT perform...
Can you elaborate with pictures on how you went about that?
I'm aware it's an older thread, but what was the outcome from this? I'm looking at the LS3 to swap in to a 2.9 AR5 rwd equipped truck. I'll use the trans adapter for retaining the AR5. Just not...
Having a hard time finding anything that is for a 2010 to 2012 Colorado Canyon regarding LS swap support.
Has anyone successfully done a 2010-2012 Colorado or Canyon inline with RWD 5 speed to...
tried finding a MDi to use for BCM programming but have not found a device that supports the 2008 thru 2012 colorado's.
Most support 2007 LD trucks, but in the specs, it never lists that...
if i set vats patch 1 and vats patch 2 to disabled, will that bypass the signal being cut by the system & then allow the truck to start? What about starter fault checks, do i need to set that to...
You are sure there are no vacuum leaks? Injector seals good?
Look in the trans section for rpm & gear limiters. I think some software development tossed that in the tcm area... might need to add in credits for that too...
It has always been a capability sought after.
Not sure which fan still. Few trips to the yard and all had clutch style
Was there ever a successful deletion of the dodge caliber srt4 Intake Manifold Runner Control Valve?
I do not see where exactly in HPT where it can be addressed.
Is it possible to tune it out of...
Which trailblazer had the e-fan? I only recollect those being equipped with clutch style.
I looked up the vendor's for my application, but they either are no longer supporting the 2008's or they...