Just for the heck of it,try this.
AIRFLOW>GENERAL>LIMITS MAX AIRFLOW.enter maximum value
Also Pressure ratio Limits,take the Maximum cells to a 7 value.
This may not work,but it's worth a try.
Type: Posts; User: vortec
Just for the heck of it,try this.
AIRFLOW>GENERAL>LIMITS MAX AIRFLOW.enter maximum value
Also Pressure ratio Limits,take the Maximum cells to a 7 value.
This may not work,but it's worth a try.
From what I have personally noticed is,if you zero or reduce the TQMGT Spark Retard,the idle will hunt and or surge as there is no longer over and under speed spark control.
Hope this helps
Sometimes,it can take up to 20-30 minutes before I can get a file to flash in an 04 NGC3
It will end up working,but man can it take forever.
email support
[email protected]
http://www.hptuners.com/forum/showpost.php?p=32069&postcount=2
I noticed that.Bummer
Cylinder volume is pretty much correct
408cid=6.69L
6.69L/8 cylinders = 0.83625 L per cylinder
I highly recommend working on the spark table,you have alot of potential waiting to be released....
if we only had more out there:cheers:
There are hundreds of threads about how to get beta,Search tab is your friend!! Same threads over and over and over
Speedo>Limiter>General>Source>Calibration (not GMLAN)
Bingo:cheers:
Correct it's the torque converter.
Ahh got cha,Now I am curious.I am going to dig more files up on monday.
Email support,they will respond
Here ya go Chief:cheers:
DFCO (Deceleration Fuel Cutoff)
We are waiting for this release.Can't wait.
Autocal works but I want HPT
They should void if it has been tampered with,why shouldn't they.If you are worried about warranty,leave it alone in my opinion.
I like how people want to mess with them and take them in for free...
I know what you mean,they think mechanical problems can be fixed by tuning.Those are the ones That have alot to learn:banghead:
Yes you can flash the 106 pcm with an 06 SSS os.
You will need to do a write entire!!!!!
What is the service number on the PCM?
If they COULD be locked yes.
I see this is an 07 classic.
Put the PE enable TPS hot and cold back to stock.Then it will.LOL
Do it and report back,it will work.For whatever reason,this only happens on the 07 classic 9624 OS
It is not going idle very well with over and under speed spark the way it is.
idle airflow is a big issue with your troubles as well like WS6firebird stated
Correct:cheers: