Tabs should be an easy thing to add in VS ... :)
Type: Posts; User: [email protected]
Tabs should be an easy thing to add in VS ... :)
The only one in Tucson that i know that have tuned LS-engines is Evan Smith@estuned. NicD, is who i would recommend but he's in Chandler/Phoenix area, sounds like you want someone here in Tucson
No, the car is not running SD, but it has an LS3 3bar MAP with the proper calibration. Looked under OS and it looks the TCS patch is available but not applied. VATS1/2 and Starter Checks are enabled.
Tried that and it didn't work. I took the car to the dealer on Tuesday and supposedly found the Trans Connector pins backed out of the connector, they rebuilt the connector test drove without any...
Anyone?
Folks,
I reflashed ECM and TCM because my car got the valve body and TCM replaced. Drove the car for about 20 miles then the contact dealer warning came up, followed by downshift to 2nd gear, then...
Log in to your account in the hptuners website, use this link:
http://www.hptuners.com/customers/tune.php
Look in the tune repository, there are a few stock calibration files for G8's
With the interface connected to the car and the key in RUN position connect the VCM scanner->Help->VCM Info->Hit the "i" icon, it will get all the vcm info including the FW version.
Hehe, i did follow the instructions it just error out (flashing red light, ran out of memory), working now. Thanks.
I have the latest beta that's suppose to fix the stand alone data logging issue. Looks like in my case the firmware update doesn't fire up. I can see the pop up that says checking for firmware update...
How about Arizona?!?!??!
Anyone?
I'm trying to scale these injectors on my G8, i was able to get come up with some calc'ed flow rate to scaled them down (yes, i know they don't behave linearly, made these cal'cs factoring a .60 of...
Do you know when this beta will be released? That will help me to setup my 80lbs injectors properly instead of scaling them.
FAST 57lbs, yeah i know, no flow data.
Will gather some this week in a new log file.
Any chance on looking at it?
Thanks for your input
Will give it a shot.
A Single 625ml/min nozzle, Am i need to go to a dual setup?
I'm pretty sure the car is making 600+rwhp right now, and this nozzle is only...
Heheh, ok.
I found a thread here to scale IFR by 56.3%, will give it a shot. Thanks and appreciate for helping on this.
Thanks DSteck, im running FAST 57lbs/hr injectors, im supposed to receive today the Ford Racing M-9593-LU80 injectors. I'll be switching to those because im going with an E85 setup sometime in a near...
experts chime in please!
Interesting, thanks for your feedback, im learning as i go. I have an LC1 but i just haven't installed it yet. Thanks also for the scanner tips, yes i noticed a max of 3.7 kR, i have to look into the...
Today i performed a WOT run on my Procharged G8 and noticed few things that i didn't notice before because i had no hptuners: First, seems like I'm getting around 3 degrees of KR around 5200rpm and...
Thanks!