So I got it to stay locked finally by maxing out the misfire tables....I never would've guessed that would do it. Two pulls back to back and it put down a lot more power.
830/760 on my mustang...
Type: Posts; User: 2000_SS
So I got it to stay locked finally by maxing out the misfire tables....I never would've guessed that would do it. Two pulls back to back and it put down a lot more power.
830/760 on my mustang...
all limits are raised, yes. I attached my current working file. It's far from complete, but nonetheless, should allow the TCC to stay locked at WOT. Next thing i plan on trying is maxing out the...
Raised it substantially, 1150ftlbs I think, but not maxed.
TCC pressure goes to 0psi in the transition from cruise to WOT.
Having the same WOT unlock problem in a 09 G8 with a LSA on my dyno. Everything in the tune commands it to stay locked in all shift patterns and I'm commanding it locked in the VCM Scanner.
Tcc...
Setting Engine>Airflow>Electronic Throttle "Max Position" to 95% instead of 100 fixed it.
see attached
Adding the slave segment adds the ability to increase thresholds for a certain DTC that usually pertains to aftermarket throttle body issues, I thought it was the p1516. I'll go back through a couple...
Or am I thinking of E40 GTOs 🤔....
Am I thinking of something else, a different DTC? I thought on e38 ECMs you could add the p1516 slave segment and adjust the thresholds...
I'm getting a P1516 on a 2009 G8 that has a LSA blower, stage 3 PDS cam and NW 103. I don't see the "add slave segment" option under the Edit menu and only have the P2101 thresholds under the Eng...
Ok thanks, Bill!
Hey guys, I'm trying to help a guy determine why his transmission got toasted on the dyno and the file he sent me won't open. I don't know who tuned the car or what device the tune was read with....
I'm on Beta 4.9.520 tuning a 2021 Camaro SS and the scanner is doing the same thing...crashing shortly after i hit the "Stop" button
I'm on version 4.6.3 and also beta 4.7.106 (updating to .114 as i type this).
After logging on the dyno, shortly after i hit the "stop" button, the scanner just closes.
Anybody have this issue?...
I've got a '99 C5 with a 223/231 112 cam and a D1SC procharger making about 8.0-8.5psi. The tune definitely needs scaled but i've just been roughing it in to get the car running good enough to drive...
This just saved my ass as well on a E38, 2008 Silverado....had a BAD lean condition at idle. Fuel trims were 20%+ and the wideband was reading .99-1.01 lambda even it was spot-on in open loop. There...
Adjust the parameters next to the box where you specify your throttle body up or down until you find a more acceptable setting
Got it lined out i think....Making 316hp 355ft lbs...totally stock 5.7 Ram with a COMP HRT NSR stage 1 216/222 @.050 cam.
Idle issues i'm having currently are when you rev it in P/N to, say,...
Tuning a 2012 Ram 5.7 with a mild cam and cold air after a MDS delete.
I've gathered a bunch of info on hemi tuning on here and have disabled the NN and got the VE dialed in. the truck has what...
I went ahead and removed the SAE pids and continued tuning, cautiously. The truck made 477/470 on my MD500 on 11psi and 12* on 91 octane, SBE 5.3 with a small cam. Control module voltage and lambda...
I've got a 2014 Silverado Reaper truck i'm finishing up. It's having an audible knock/pinging under low rpm/high load situations typically in 5th and 6th gear, as seen in the screenshot.
I have...
I have a ls swap project with a P59 from a suburban with a 2 bar OS in it.
Logging control module voltage (sae) showed 8.4 - 10v at idle and picked up to only about 11v with rpm. Alternator and...
Ya its embarrassingly slow...i think it's the 1.9L. A stock 6.2/8speed truck would walk away from it.
Definitely MAF only tune with a stock MAP that pegs out at 114kpa or whatever the max is....
Yeah it's a magnacharger
I've got a Reaper truck in for some diagnostics and tuning. It's the supercharged 5.3 package and is, in my opinion, embarrassingly slow. I think it is mostly tune related as the tune has 0 changes...