When flashing a file some modules need to receive wake up message through CAN bus so better check it with Xentry and clear fault codes as it may be
"Loss Communication" on the AMG Drive Unit...
Type: Posts; User: outlaw_50
When flashing a file some modules need to receive wake up message through CAN bus so better check it with Xentry and clear fault codes as it may be
"Loss Communication" on the AMG Drive Unit...
You are overboosting which causes Low Fuel Rail Pressure and the car triggers P0108 to keep the car safe.
If you desire more boost then you should work on you fuel system.
Tactrix to read/write
Winols for checking tables
It would be possible if you could add custom code and attach an external flex fuel sensor. I only saw one tuner who did that on MED17.7.2 A45.
M156 options is to add bigger injectors, remove some...
Sure we could get it sort out but as he said tactrix would be better.
Thanks for the good input !
Took a look at the tune,
Why are the Optimum Torque Monitors and Throttle Max Flow zeroed out?
could you post your stock file so we could get a better look at your changes
Its not clear what yo are asking to do
way different specially for ME9.7
I think I could help with PID's if thats your issue but regarding "Selector" PID's that wont show even with the fix I have for normal parameters.
if there is an option to choose then choose MED17.7.1.
If you did gather info and it didnt gather or you tried to log but there are many pid's missing then the coding of the ecu is not compatible...
wont work
Just read the file and you will be supplied with a stock file from the server
no only VR
To fix the issue,
the sensors located on the Air Filter Box are called Barometric Pressure Sensors most people tend to think they are MAF sensors which is on that case not correct !! As these...
you could read more about dragy to understand how it works and calculates time
Winols official site
I would go Dragy path as time is calculated using GPS signal but Bluetooth is only used as a communication between your phone and Dragy to display time.
Better numbers with this platform could be...
In my opinion you could
- add more boost
- More Load
- Calibrate Inj's
- adjust fueling tables
Checked Log:
- Not too many informative channels (vcm dont support all the important channels)
- Short Trim Bank 1 is too lean
- Short Trim Bank 2 is not logged
- Lambda looks good
- Timing...
Better try tuning through winols. Thats the majorty of tuning I do.
Some definitions and map address are not exactly correct in hptuner.
If you want to dig and understand the platform more I'd...
here you go
134777
maybe try changing "Boost Pressure Valve" the one in front of the top engine "Top up bottle"
Who unlocked your PCM to tune it
closing between shifts is normal if you dont have TCU Tune
No definition file available on server to download stock file