Ok me working with a few other guys, and one of them having a direct line to a hpt engineer, we were able to get the correct tables added to fix this issue. I can?t tell you what it is, but the table...
Type: Posts; User: rynez06
Ok me working with a few other guys, and one of them having a direct line to a hpt engineer, we were able to get the correct tables added to fix this issue. I can?t tell you what it is, but the table...
do you know of whom have fixed it? at this point I'm willing to pay someone to show me the fix. I just need to get this car out so I can get paid. this is the only issue with this car
nevermind all it did was delay the limp mode, but it eventually does it.
I forgot to post back. Ive appeared to have remedy the issue. Thank you
We have a 2016 hellcat here with the 4.5 whipple and the big oval tb. this car has been a pain to tune, but over time with hptuners adding tables, and help from other great tuners it drives great and...
everytime I open the software I get this error.
I paid the $99 and I inputted the app key and I'm still getting definition failed to load error... does this only work on Chrysler apps or also gm?
been here before. Honestly referring to a lt4 file doesn't help at all, so much different about the file it, it really isn't useable. the only way ive been able to calm the surge is limiting the...
out here in California on 91, I've had better luck targeting a little more rich Lambda, more like .80ish... it allows me to get a little more timing in it and a little more power. Plus if the...
I would like these things added as well.
the OP mentioned 15 degrees at WOT.... like a block of 15 degrees? or 15 degrees at peak power? i've tuned quite a bit of gen 5's now and having a block of 15 degrees would definitely be an issue,...
well that answered my question lol
Post up your file before and after correction , let's see if we can help.
Why can't you just do the calculation and input the data by hand ? It's not hard.
fuel pressure is sae 0 because there is no fuel sensor signal. fuel pressure SAE is actual measured fuel pressure. the car is not running during that screenshot. that the cranking fuel values
like this?? car runs the same... same values.... bro just admit you're wrong. we all make mistakes. we are all here to learn and help one another.
ive done about 15 fpcm deletes between the v's and the 10+ camaros, i agree with dave, all requested and desired pressures revert to the default number once the fpcm is removed, even though the...
once again sorry for the bad iphone pics, my camera is messed up, and this computer doesnt seem to want to screen shot anything.
notice the actual pressure is 0 even though all others are 75psi....
Sitting in a 2012 Ctsv with fpcm deleted with a boost referenced standard regulator system. When you delete the fpcm , the computer assumes what your default fuel pressure setting is, hence the name...
i would be interestedas well
yeah very common with that intercooler... i always sell the customer on the larger 1000hp intercooler.... that one functions nicely
anyone?
The changes I made are from tunes of 4 different 07 vettes with a similar cam and setup... Sounds like to me you might have another issue going on ..
ok here is my revised file, and scanner config.... shoot me an email with a log of idle, cruise and wot (afr reading preferred) ... your setup is pretty basic...
ok god man that tune you initially posted is absolutely horrible... the PE is a mess, no ve changes at all, idle airflow is a mess, your rev limiter settings are affectedly not working and tb...