Search:

Type: Posts; User: Fu03steveC63

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. I believe there?s mention of this in another...

    I believe there?s mention of this in another thread. My understanding is that these table allows you to target different lambda value besides WOT.
  2. Replies
    17
    Views
    781

    Bosch 630cc injector

    Bosch 630cc injector
  3. Replies
    17
    Views
    781

    96348 96349 96350 I have spend few mornings...

    96348
    96349
    96350

    I have spend few mornings dialing the ECU in. See attach log and tune. I have a few question from here as I have gotten the car to run decently with a few small problem:

    1)...
  4. Replies
    17
    Views
    781

    So I checked cylinder 1 spark plug and it was...

    So I checked cylinder 1 spark plug and it was fine but I changed it just to be sure. It was still throwing CEL for cylinder 1 misfiring and random cylinder misfire. I dug a bit more and here are the...
  5. Replies
    17
    Views
    781

    I tried everything mentioned above and the first...

    I tried everything mentioned above and the first night (53 degrees), car ran fine without adjusting too much parameters. Car didn?t limp nor throw CEL. Today, I drove it as it was and CEL keep coming...
  6. Replies
    17
    Views
    781

    From research, there are many full E85 with stock...

    From research, there are many full E85 with stock system out there without any known issues.
  7. Replies
    17
    Views
    781

    Thanks! I?ll give it a go

    Thanks! I?ll give it a go
  8. Replies
    17
    Views
    781

    Do I simply adjust MAF when running E85?

    Do I simply adjust MAF when running E85?
  9. Replies
    17
    Views
    781

    Just to ensure I got the steps correct: 1) log...

    Just to ensure I got the steps correct:

    1) log LTFT at idle and driving around with stock injectors
    2) change to larger injectors
    3) log larger injector at idle
    4) adjust injector multiplier...
  10. Replies
    17
    Views
    781

    I don?t plan on running the controller. I ran it...

    I don?t plan on running the controller. I ran it before but car was unhappy adjusting to it. My plan is to have a custom tune but I was having trouble scaling the injectors last time. Also, any...
  11. Replies
    17
    Views
    781

    Flex Fuel M156

    Does anybody have any clue where to adjust the stoich ratio of 14.7 for gasoline to Flex Fuel? I can?t seem to find any parameters that allow to adjust for flex fuel. I know it has been done before....
  12. Replies
    6
    Views
    1,089

    Bump! It?s been a few months and I now have...

    Bump!

    It?s been a few months and I now have some time to re-attempt scaling larger injectors. Before I start this time around, I?m curious if anybody can point me to the right direction on the...
  13. Replies
    4
    Views
    476

    Agreed!

    Agreed!
  14. That?ll get you some attention. 😂

    That?ll get you some attention. 😂
  15. Replies
    21
    Views
    1,561

    Yes, I am making the same change to both tables. ...

    Yes, I am making the same change to both tables.

    You?re right! I should convert back and wait until the long tube header is installed.
  16. Replies
    21
    Views
    1,561

    I was playing with it a bit but was not able to...

    I was playing with it a bit but was not able to get a decent loud pop. Is it because I don?t have long tune header? I can hear small muffle pops but not aggressive nor loud pops. I set minimum / long...
  17. Replies
    21
    Views
    1,561

    Wow! Thank you very much for the detailed...

    Wow! Thank you very much for the detailed explanation! I will try it out then reach out if I have any more questions.
  18. Replies
    21
    Views
    1,561

    Only around the range where downshifts occur,...

    Only around the range where downshifts occur, correct? And the similar adjustments are made in both minimum base and long term spark?
  19. Replies
    21
    Views
    1,561

    Sounds good! So how much adjustments were made to...

    Sounds good! So how much adjustments were made to achieve the level of pop and crackle?
  20. Replies
    4
    Views
    418

    So how do you treat the (-) value? Manual...

    So how do you treat the (-) value? Manual multiplication at each cell?
  21. Replies
    6
    Views
    1,089

    I had removed basically all TQ limiters and...

    I had removed basically all TQ limiters and raised permissible TQ table. I?m still going into limo mode. Has anybody been successfully at scaling injectors up without HP Tuner without going into limp...
  22. I have gotten super busy with a new addition in...

    I have gotten super busy with a new addition in the family and hasn't got much time to go back to dyno. After a few notes from Backyardturbo, I was able to advance further with better results but I...
  23. Nice! I?m glad you were able to show great...

    Nice! I?m glad you were able to show great results.
  24. Replies
    16
    Views
    2,128

    I'll give it a try when my car is repaired....

    I'll give it a try when my car is repaired. Center console caught on fire and burned the main body harness.
  25. Replies
    16
    Views
    2,128

    8118781186

    8118781186
Results 1 to 25 of 37
Page 1 of 2 1 2